 | Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |
The hierarchy level [edit logical-systems logical-system-name] in the JUNOS software contains the following hierarchy levels in their entirety:
Each of these hierarchy levels is used to configure an aspect of the logical system. The logical system fully supports each subsequent hierarchy level. You always have at least one logical system, the “master” logical system by default.
For documentation of these aspects of the logical system, see the documentation for each hierarchy level. The configurations are not documented separately for logical systems.
For a detailed example of a logical system configuration, see the JUNOS Feature Guide.
For information on configuring logical system interface properties, see the JUNOS Network Interfaces Configuration Guide and the JUNOS Services Interfaces Configuration Guide.
For information on configuring logical system routing policy properties, see the JUNOS Policy Framework Configuration Guide.
For information on configuring logical system multicast protocols, see the JUNOS Multicast Protocols Configuration Guide.
For information on configuring logical system routing protocols, see Interior Gateway Protocols and BGP.
For information on configuring logical system routing instances, see Routing Instances.
For information on configuring logical system routing options, see Protocol-Independent Routing Properties.
| Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |