[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
Configuring Multitopology Routing
To enable Multitopology Routing,
you must configure a topology for each type of traffic and interface;
an interior gateway protocol, such as OSPFv2 or static routes; filter-based
forwarding; and BGP. Depending on your network configuration, you
can also configure MPLS label-switched paths (LSPs). This chapter
discusses the following tasks for configuring Multitopology Routing
(MTR).
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
