if-exceeding



if-exceeding {
bandwidth-limit bps;
bandwidth-percent number;
burst-size-limit bytes;
}



[edit firewall policer policer-name],
[edit logical-systems logical-system-name firewall policer policer-name]

Statement introduced before JUNOS Release 7.4.

Logical systems support introduced in JUNOS Release 9.3.

Configure policer rate limits.

bandwidth-limit bps—Traffic rate, in bits per second (bps). There is no minimum value, but any value below 61,040 bps results in an effective rate of 30,520 bps.
bandwidth-percent number—Port speed, in decimal percentage number.
burst-size-limit bytes—Maximum burst size. The minimum recommended value is the maximum transmission unit (MTU) of the IP packets being policed. The maximum burst size limit varies depending on the platform used.

firewall—To view this statement in the configuration.

firewall-control—To add this statement to the configuration.