[Contents] [Prev] [Next] [Index] [Report an Error]

X.21 Interface Default Settings

If you include the line-protocol x.21 statement, the default settings are as follows:



dce-options | dte-options {
control-signal normal;
indication normal;
}
clock-rate 16.384mhz;
clocking-mode loop;
control-polarity positive;
encoding nrz;
indication-polarity positive;

You can include the line-protocol statement at the following hierarchy levels:

[edit interfaces se-pim/0/port serial-options]
[edit interfaces se-fpc/pic/port serial-options]

[Contents] [Prev] [Next] [Index] [Report an Error]