[Contents] [Prev] [Next] [Index] [Report an Error]

V.35 Interface Default Settings

If you include the line-protocol v.35 statement, the default settings are as follows:



dce-options | dte-options {
cts normal;
dcd normal;
dsr normal;
dtr normal;
rts normal;
}
clock-rate 16.384mhz;
clocking-mode loop;
cts-polarity positive;
dcd-polarity positive;
dsr-polarity positive;
dtr-circuit balanced;
dtr-polarity positive;
encoding nrz;
rts-polarity positive;

You can include the line-protocol statement at the following hierarchy levels:

[edit interfaces se-pim/0/port serial-options]
[edit interfaces se-fpc/pic/port serial-options]

[Contents] [Prev] [Next] [Index] [Report an Error]