[Contents] [Prev] [Next] [Index] [Report an Error]

trunk-bandwidth

Syntax



trunk-bandwidth rate;

Hierarchy Level



[edit interfaces interface-name unit logical-unit-number],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number]

Release Information

Statement introduced before JUNOS Release 7.4.

Description

For ATM2 IQ interfaces configured to use Layer 2 circuit trunk mode, configure a scheduler so that unused bandwidth from any inactive trunk is proportionally shared among the active trunks.

During congestion, each trunk receives a proportional share of the leftover bandwidth, thus minimizing the latency on each trunk.

Options

rate—Peak rate, in bits per second (bps) or cells per second (cps). You can specify a value in bits per second either as a complete decimal number or as a decimal number followed by the abbreviation k (1000), m (1,000,000), or g (1,000,000,000). You can also specify a value in cells per second by entering a decimal number followed by the abbreviation c; values expressed in cells per second are converted to bits per second by means of the formula 1 cps = 384 bps.

Usage Guidelines

See Configuring Layer 2 Circuit Trunk Mode Scheduling.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

[Contents] [Prev] [Next] [Index] [Report an Error]