trigger

Syntax

Hierarchy Level

Release Information

Statement introduced before JUNOS Release 7.4.

Description

For ATM over SONET/SDH, SONET/SDH interfaces, and 10-Gigabit Ethernet interfaces in WAN PHY mode, configure SONET/SDH defect triggers to be ignored.

Default

If you do not include this statement, all SONET/SDH defect triggers are honored.

Options

defect—Defect to ignore or hold. It can be one of the following:

• ais-l—Line alarm indication signal
• ais-p—Path alarm indication signal
• ber-sd—Bit error rate signal degrade
• ber-sf—Bit error rate signal fault
• locd (ATM only)—Loss of cell delineation
• lof—Loss of frame
• lol—PHY loss of light
• lop-p—Path loss of pointer
• los—Loss of signal
• pll—PHY phase-locked loop out of lock
• plm-p—Path payload label mismatch
• rfi-l—Line remote failure indication
• rfi-p—Path remote failure indication
• uneq-p—Path unequipped

  The remaining statements are explained separately.

Usage Guidelines

See Configuring SONET/SDH Defect Triggers to Be Ignored.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.