Symbols Numbers A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Symbols
- ( ), in syntax descriptions 1,
- [ ], in configuration statements 1,
- { }, in configuration statements 1,
- #, comments in configuration statements 1,
- < >, in syntax descriptions 1,
- | (pipe), in syntax descriptions 1,
Numbers
- 10-Gigabit Ethernet interfaces 1,
- 802.3ah OAM 1,
- DWDM 1,
- framing 1,
- SONET 1,
- 10-Gigabit Ethernet IQ PIC 1,
- 128-bit IPv6 address 1,
- 802.1ag OAM
- configuring Ethernet interfaces 1,
- 802.1Q/Ethernet 802.3 encapsulation
- encapsulation overhead 1,
- 802.1Q/Ethernet SNAP encapsulation
- encapsulation overhead 1,
- 802.1Q VLANs
- mixed VLAN tagging 1, 2, 3,
- VLAN IDs 1, 2,
- VLAN tagging 1, 2, 3,
- 802.1x Port-Based Network Access Control 1,
- 802.3ad statement 1,
- usage guidelines 1, 2,
- 802.3ah OAM
- configuring Ethernet interfaces 1,
- example configuration 1,
A
- accept-source-mac statement 1,
- usage guidelines 1,
- access-concentrator statement 1,
- usage guidelines 1,
- access interface
- interface-mode statement 1,
- access profile
- configuring 1,
- default CHAP secret 1,
- default PAP password 1,
- access-profile statement 1,
- usage guidelines 1, 2,
- accounting profiles
- logical interfaces 1,
- example configuration 1,
- physical interfaces 1,
- example configuration 1,
- accounting-profile statement 1,
- usage guidelines 1, 2,
- accounting statement 1,
- usage guidelines 1,
- acfc statement 1,
- usage guidelines 1,
- ack-delay-time statement 1,
- usage guidelines 1,
- ack-max statement 1,
- usage guidelines 1,
- acknowledge-retries statement 1,
- acknowledge-timer statement 1,
- usage guidelines 1,
- action-profile statement
- applying to remote MEP 1,
- CFM 1,
- LFM 1,
- action-red-differential-delay statement 1,
- usage guidelines 1,
- action statement 1,
- activation-delay statement 1,
- usage guidelines 1,
- activation-priority statement 1,
- active statement
- usage guidelines 1,
- address and control field compression 1,
- address entries 1,
- address statement 1,
- usage guidelines 1, 2,
- ADSL
- example configuration 1, 2,
- advertise-interval statement 1,
- APS
- usage guidelines 1,
- advertisement intervals
- APS interfaces 1,
- ae
- physical part of interface name 1,
- age statement 1,
- aggregated Ethernet interfaces 1,
- CCC 1, 2,
- configuring 1,
- example configuration 1,
- LACP 1,
- example configuration 1,
- interval 1,
- traceoptions 1,
- Layer 2 VPNs 1,
- link speed 1,
- minimum links 1,
- aggregated-ether-options statement 1,
- usage guidelines 1,
- aggregated SONET interfaces 1,
- configuring 1,
- example configuration 1,
- firewall filters 1,
- example configuration 1,
- link speed 1,
- minimum links 1,
- aggregated-sonet-options statement 1,
- usage guidelines 1,
- aggregate-ports statement 1,
- aggregate statement 1,
- usage guidelines 1, 2, 3,
- aging timer
- ARP 1,
- all (tracing flag)
- interfaces 1,
- VRRP 1,
- allow-any-vci statement 1,
- allow-fragmentation statement 1,
- allow-remote-loopback statement 1,
- annex statement 1,
- usage guidelines 1,
- apply-action-profile statement 1,
- APS
- basic support 1,
- circuit pairs 1,
- circuits, switching between 1,
- configuration example 1,
- link PIC redundancy
- example configuration 1,
- link state replication 1,
- load sharing 1,
- load sharing between circuits
- example configuration 1,
- overview 1,
- revertive mode 1,
- timers 1,
- unidirectional mode 1,
- aps statement 1,
- usage guidelines 1,
- ARP
- aging timer 1,
- arp option
- policers 1,
- ARP proxy, unrestricted
- Ethernet interfaces 1,
- arp statement 1,
- usage guidelines 1,
- ARP table, static
- Ethernet interfaces 1,
- as
- physical part of interface name 1,
- asynchronouus-notification statement 1,
- at
- physical part of interface name 1,
- ATM1 and ATM2 IQ
- configuration differences 1,
- ATM1 interfaces
- cell-relay circuit
- example configuration 1,
- shaping values
- example calculation 1,
- ATM2 IQ interfaces
- early packet discard threshold
- example configuration 1,
- eight forwarding classes
- example configuration 1,
- Layer 2 circuit AAL5 mode
- example configuration 1,
- Layer 2 circuit cell-relay mode
- example configuration 1,
- Layer 2 circuit cell-relay promiscuous mode
- example configuration 1,
- Layer 2 circuit trunk mode
- example configuration 1,
- MTU sizes 1, 2, 3,
- ATM cell-relay encapsulation
- encapsulation overhead 1,
- ATM encapsulation 1,
- ATM CCC VC multiplex 1,
- ATM cell-relay 1,
- ATM NLPID 1,
- ATM PVC 1,
- ATM PVC encapsulation 1, 2,
- ATM SNAP 1,
- ATM TCC SNAP 1,
- ATM TCC SNAP multiplex 1,
- ATM VC multiplex 1,
- cell-relay accumulation mode 1,
- Cisco ATM NLPID 1,
- Ethernet over ATM 1,
- Ethernet VPLS over ATM 1,
- keepalives 1,
- Layer 2 switching cross-connects 1,
- Multilink PPP over ATM 1,
- PPP over ATM 1,
- PPP over ATM multiplex 1,
- See also ATM interfaces
- atm-encapsulation statement 1,
- ATM-for-ADSL
- example configuration 1,
- ATM interfaces
- ATM overview 1,
- communication with ATM switches
- example configuration 1,
- encapsulation 1,
- ILMI with cell relay
- example configuration 1,
- MTU sizes 1, 2, 3, 4,
- PIC type
- example configuration 1,
- PPP over ATM encapsulation
- example configuration 1,
- virtual circuits
- example configuration 1,
- virtual paths
- example configuration 1,
- atm-options statement 1,
- ATM-over-ADSL
- encapsulation types 1,
- operational mode 1,
- ATM-over-SHDSL 1,
- ATM PVC encapsulation 1, 2,
- atm-scheduler-map statement 1,
- ATM-to-Ethernet interworking 1, 2, 3,
- VCI range 1,
- virtual path identifier 1,
- VLAN tagging 1, 2,
- authentication-key statement 1,
- APS 1,
- usage guidelines 1,
- authentication-profile-name statement
- access-profile-name 1,
- authenticator statement 1,
- auto-discovery statement 1,
- Automatic Protection Switching See APS
- autonegotiation
- configuring manually 1,
- auto-negotiation statement
- Gigabit Ethernet 1,
- usage guidelines 1,
- J-series uPIM 1, 2,
- auto-reconnect statement 1,
- usage guidelines 1,
- auto-synchronize statement
- usage guidelines 1,
B
- backup-destination statement 1,
- backup-interface statement 1,
- backup-options statement 1,
- backup routers
- VRRP 1,
- bandwidth-limit statement 1,
- usage guidelines 1,
- bandwidth statement 1,
- usage guidelines 1,
- bchannel-allocation statement 1,
- bearer-bandwidth-limit statement 1,
- BERT
- configuring interface diagnostics 1,
- bert-algorithm statement 1,
- usage guidelines 1, 2, 3,
- bert-error-rate statement 1,
- usage guidelines 1,
- bert-period statement 1,
- usage guidelines 1,
- BGP
- tracing operations 1,
- bit error rate test See BERT
- BOOTP
- accepting packets 1,
- Bootstrap Protocol See BOOTP
- borrower interface
- unnumbered demux 1,
- unnumbered Ethernet 1,
- br
- physical part of interface name 1,
- braces, in configuration statements 1,
- brackets
- angle, in syntax descriptions 1,
- square, in configuration statements 1,
- broadcast statement 1,
- usage guidelines 1,
- buildout statement 1,
- bundle statement 1,
- burst-size-limit statement 1,
- usage guidelines 1,
- byte encoding 1,
- byte-encoding statement 1,
- bytes statement 1,
- usage guidelines 1,
C
- c2 SONET header byte 1,
- callback statement 1,
- usage guidelines 1,
- callback-wait-period statement 1,
- usage guidelines 1,
- caller statement 1,
- usage guidelines 1,
- calling-number statement 1,
- usage guidelines 1,
- cau4
- physical part of interface name 1,
- C-bit parity mode 1,
- cbit-parity statement 1,
- cbr statement 1,
- CCC 1,
- aggregated Ethernet 1, 2,
- Layer 2 VPNs 1,
- aggregated Ethernet 1,
- ce1
- physical part of interface name 1,
- cell-bundle-size statement 1,
- Challenge Handshake Authentication Protocol See CHAP
- channelized AU-4 interfaces 1,
- example configuration 1,
- channelized E1 interfaces
- example configuration 1, 2, 3,
- interface naming 1, 2,
- channelized E1 IQ and IQE interfaces
- time slots 1,
- channelized E1 IQ interfaces
- example configuration 1,
- time slots 1,
- channelized interfaces
- clock sources 1,
- channelized IQ interfaces
- supported options 1,
- channelized NxDS0 IQ interfaces
- example configuration 1, 2, 3,
- channelized OC12 interfaces
- example configuration 1, 2,
- traffic-shaping rates 1, 2, 3,
- channelized OC12 IQ interfaces
- example configuration 1,
- channelized OC3 IQ interfaces 1,
- example configuration 1,
- channelized OC48 interfaces
- SONET header bytes 1,
- channelized STM1 interfaces
- example configuration 1, 2,
- interface naming 1,
- time slots 1, 2,
- virtual tributary mapping 1,
- channelized STM1 IQ interfaces
- example configuration 1,
- channelized T1 interfaces
- example configuration 1, 2,
- channelized T1 IQ interfaces
- VT mapping 1, 2, 3, 4,
- channelized T3 interfaces
- loop timing 1,
- channelized T3 IQ interfaces
- example configuration 1, 2,
- channel part of interface name 1,
- CHAP 1, 2,
- configuring default CHAP secret 1,
- example configuration 1, 2,
- chap-secret statement 1,
- chap statement 1,
- usage guidelines 1, 2,
- checksums See frame checksums
- ci
- physical part of interface name 1,
- circuit cross-connect CCC 1,
- circuit pairs, APS 1,
- Cisco HDLC encapsulation 1,
- configuring on physical interfaces 1,
- encapsulation overhead 1,
- example configuration 1,
- keepalives 1,
- Layer 2 switching cross-connect 1,
- cisco-interoperability statement 1,
- classifier statement 1,
- usage guidelines 1,
- class of service See CoS
- clear-dont-fragment-bit statement 1,
- client statement 1,
- clocking modes 1,
- clocking-mode statement 1,
- usage guidelines 1,
- clocking statement 1,
- usage guidelines 1, 2, 3,
- clock rates 1,
- clock-rate statement 1,
- usage guidelines 1,
- clock sources 1, 2, 3, 4,
- channelized interfaces 1,
- coc1
- physical part of interface name 1,
- coc12
- physical part of interface name 1,
- coc3
- physical part of interface name 1,
- comments, in configuration statements 1,
- communication with ATM switches
- example configuration 1,
- compatibility-mode statement 1,
- compression 1,
- compression-device statement 1,
- compression statement 1,
- usage guidelines 1, 2,
- connections
- configuration statements 1, 2,
- connections statement 1,
- usage guidelines 1,
- connectivity-fault management 1, 2,
- connectivity-fault-management statement 1,
- container-devices statement 1,
- device-count 1,
- container interfaces 1,
- configuration example 1,
- container-list statement 1,
- container-options statement 1,
- container-type statement 1,
- continuity-check statement 1,
- control leads
- serial interfaces 1,
- control-leads statement
- usage guidelines 1,
- control-polarity statement 1,
- usage guidelines 1,
- control-signal statement 1,
- usage guidelines 1,
- conventions
- text and syntax 1,
- copy-tos-to-outer-ip-header statement 1,
- core-dump statement 1,
- usage guidelines 1,
- CoS
- eight forwarding classes
- example configuration 1,
- cp
- physical part of interface name 1,
- crc-major-alarm-threshold statement 1,
- crc-minor-alarm-threshold statement 1,
- cstm1
- physical part of interface name 1,
- cstm4
- physical part of interface name 1,
- ct1
- physical part of interface name 1,
- ct3
- physical part of interface name 1,
- cts-polarity statement 1,
- usage guidelines 1,
- cts statement 1,
- usage guidelines 1,
- curly braces, in configuration statements 1,
- current statement 1,
- customer support 1,
- contacting JTAC 1,
D
- damping
- interface transitions 1, 2,
- database (tracing flag) 1,
- data circuit-terminating equipment See DCE
- data-input statement 1,
- data terminal equipment See DTE
- dcd-polarity statement 1,
- usage guidelines 1,
- dcd statement 1,
- usage guidelines 1,
- DCE 1, 2, 3,
- dce-options statement 1,
- dce statement 1,
- usage guidelines 1,
- deactivation-delay statement 1,
- usage guidelines 1,
- default-action statement 1,
- default-chap-secret statement 1,
- default-pap-password statement 1,
- default router addresses 1,
- defect triggers, SONET interfaces 1,
- configuration example 1,
- hold timers 1,
- demux
- physical part of interface name 1,
- demux0 statement 1,
- demux-destination statement 1, 2,
- demux interfaces 1,
- demux interfaces 1,
- configuring underlying interfaces for 1,
- unnumbered 1,
- demux-options statement 1,
- demux-source statement 1, 2,
- demux interfaces 1,
- dense wavelength-division multiplexing See DWDM
- description statement 1,
- example configuration 1,
- usage guidelines 1, 2,
- descriptors, interface 1,
- destination-class usage
- example configuration 1,
- destination-class-usage statement 1,
- usage guidelines 1,
- destination-profile
- usage guidelines 1,
- destination-profile statement 1,
- usage guidelines 1,
- destination statement 1,
- usage guidelines 1, 2,
- dfc
- physical part of interface name 1,
- DHCP
- accepting 1,
- dialer-options
- usage guidelines 1,
- dialer-options statement 1,
- dialer statement 1,
- dialin statement 1,
- dial-options statement 1,
- dial-string statement 1,
- usage guidelines 1,
- direction statement 1,
- disable-mlppp-inner-ppp-pfc statement 1,
- disable statement 1, 2,
- logical interfaces
- usage guidelines 1,
- physical interfaces
- usage guidelines 1,
- disabling
- keepalives 1,
- logical interfaces 1,
- physical interfaces 1,
- example configuration 1,
- discard interface 1,
- dlci statement 1,
- dlsw statement 1,
- usage guidelines 1,
- documentation set
- comments on 1,
- donor interface
- unnumbered demux 1,
- unnumbered Ethernet 1,
- do-not-fragment statement 1,
- dot1x 1, 2,
- authenticator 1,
- authentication-profile-name 1,
- interface 1, 2, 3, 4, 5, 6, 7, 8,
- See also maximum-requests
- See also quiet-period
- See also reauthentication
- See also retries
- See also supplicant
- See also supplicant-timeout
- See also transmit-period
- configuration statements 1,
- interface
- down-count statement 1,
- drop-timeout statement 1,
- ds
- physical part of interface name 1,
- ds0-options statement 1,
- usage guidelines 1, 2,
- DS3 IQ interfaces
- MTU sizes 1, 2,
- dsc
- physical part of interface name 1,
- dsl-options
- usage guidelines 1,
- dsl-options statement 1,
- dsr-polarity statement 1,
- usage guidelines 1,
- dsr statement 1,
- usage guidelines 1,
- DTE 1,
- dte-options statement 1,
- DTR circuit
- serial interfaces 1,
- dtr-circuit statement 1,
- usage guidelines 1,
- dtr-polarity statement 1,
- usage guidelines 1,
- dtr statement 1,
- usage guidelines 1,
- DWDM 1, 2,
- dynamic-call-admission-control statement 1,
- Dynamic Host Configuration Protocol See DHCP
E
- e1
- physical part of interface name 1,
- E1 interfaces
- configuration statements 1,
- example configuration 1, 2,
- ITU-T standards 1,
- MTU sizes 1, 2, 3,
- physical interface properties 1,
- time slots
- example configuration 1,
- E1 IQE interfaces
- example configuration 1,
- E1 IQ interfaces
- example configuration 1,
- e1-options statement 1,
- usage guidelines 1, 2, 3, 4,
- e3
- physical part of interface name 1,
- E3 interfaces
- configuration statements 1,
- encapsulation 1,
- ITU-T standards 1,
- MTU sizes 1, 2, 3,
- E3 IQ interfaces
- MTU sizes 1, 2,
- e3-options statement 1,
- usage guidelines 1,
- encapsulation 1,
- CCC 1,
- Ethernet 802.3 1,
- example configuration 1, 2,
- extended VLAN CCC 1, 2,
- media MTU size and 1, 2,
- on logical interfaces 1, 2,
- on physical interfaces 1, 2,
- overheads 1,
- See also ATM encapsulation
- encapsulation statement 1,
- Layer 2 switching cross-connect 1,
- logical interfaces
- usage guidelines 1, 2,
- physical interfaces
- usage guidelines 1, 2,
- encoding
- byte 1,
- line 1,
- encoding statement 1,
- usage guidelines 1,
- Enhanced IQ (IQE) interfaces
- channelized OC3 1,
- epd-threshold statement 1,
- usage guidelines 1,
- es
- physical part of interface name 1,
- es-options statement 1,
- Ethernet bridging 1, 2,
- Ethernet CCC and TCC encapsulation
- physical interfaces 1,
- Ethernet CCC encapsulation
- encapsulation overhead 1,
- Ethernet interfaces 1,
- 802.1ag OAM 1,
- 802.3ah OAM 1,
- configuration statements 1,
- example configuration 1,
- Fast Ethernet interfaces 1,
- Gigabit Ethernet interfaces 1,
- gratuitous ARP 1,
- internal Ethernet interface 1, 2,
- management Ethernet interface 1,
- mixed VLAN tagging 1, 2, 3,
- passive monitoring 1,
- proxy ARP, unrestricted 1,
- static ARP table entries 1,
- unnumbered 1,
- preferred source address 1,
- VLAN IDs 1,
- VLAN tagging 1, 2, 3,
- VRRP 1,
- Ethernet link aggregation 1,
- Ethernet over ATM encapsulation
- encapsulation overhead 1,
- physical interfaces 1,
- ethernet-policer-profile statement 1,
- usage guidelines 1, 2,
- Ethernet SNAP encapsulation
- encapsulation overhead 1,
- ethernet statement 1,
- Ethernet switching 1, 2,
- Ethernet switching interfaces 1,
- ethernet-switch-profile statement 1, 2,
- usage guidelines 1, 2,
- Ethernet TCC
- applying 1,
- encapsulation 1,
- encapsulation overhead 1,
- example configuration 1,
- eui-64 statement 1,
- usage guidelines 1,
- event (tracing flag) 1,
- event statement 1,
- event-thresholds
- frame-error statement 1,
- frame-period statement 1,
- frame-period-summary statement 1,
- symbol-period statement 1,
- event-thresholds statement 1,
- extended VLAN
- CCC
- applying 1,
- encapsulation 1,
- encapsulation overhead 1,
- example configuration 1, 2,
- TCC
- applying 1,
- encapsulation 1, 2,
- encapsulation overhead 1, 2,
- external clock sources 1, 2, 3,
- external synchronization interface
- usage guidelines 1,
F
- f1 SONET header byte 1,
- f2 SONET header byte 1,
- facility-override statement 1,
- fail-filter statement 1,
- usage guidelines 1,
- family bridge
- VLAN IDs 1,
- family descriptors 1,
- family statement 1,
- usage guidelines 1,
- family type
- specifying for underlying interfaces 1,
- Fast Ethernet interfaces
- configuration statements 1,
- Ethernet link aggregation 1,
- example configuration 1,
- ignoring Layer 3 incomplete errors 1,
- ingress rate-limit 1,
- interface speed 1,
- link modes 1, 2,
- link protection 1,
- loopback mode 1,
- MAC address filtering 1,
- MTU sizes 1, 2, 3,
- physical interface properties 1,
- proxy ARP, unrestricted 1,
- speed 1,
- static ARP table entries 1,
- usage guidelines 1,
- VLAN IDs 1,
- VLAN tagging 1, 2, 3,
- VRRP 1,
- fastether-options statement 1,
- usage guidelines 1,
- fcs statement 1,
- SONET interfaces
- usage guidelines 1,
- fe
- physical part of interface name 1,
- feac-loop-respond statement 1,
- filters 1,
- on aggregated links 1,
- example configuration 1,
- See also firewall filters
- filter statement 1,
- usage guidelines 1,
- firewall filters
- applying 1,
- example configuration 1,
- logical interfaces 1,
- flexible-vlan-tagging statement 1,
- flow control 1,
- flow-control statement 1,
- usage guidelines 1,
- f-max-period statement 1,
- font conventions 1,
- force statement 1,
- forwarding-class statement 1,
- usage guidelines 1, 2,
- fractional E1 IQ and IQE interfaces
- time slots 1,
- fractional E1 IQ interfaces
- example configuration 1, 2,
- time slots 1,
- fractional T1 IQ interfaces
- example configuration 1, 2, 3, 4,
- time slots 1, 2,
- fragment-threshold statement
- usage guidelines 1,
- fragment-threshold statement (interfaces) 1,
- frame checksums
- SONET interfaces 1,
- frame-error statement 1,
- frame-period statement 1,
- frame-period-summary statement 1,
- Frame Relay encapsulation 1,
- DCE 1, 2,
- encapsulation overhead 1,
- example configuration 1, 2,
- Frame Relay protocol 1,
- keepalives 1,
- Layer 2 switching cross-connect 1,
- logical interfaces 1,
- physical interfaces 1, 2,
- Frame Relay ether type encapsulation
- physical interfaces 1,
- Frame Relay Ether Type encapsulation 1,
- physical interfaces 1,
- framing statement 1,
- channelized OC12 IQ interfaces
- usage guidelines 1,
- usage guidelines 1, 2,
- fxp
- physical part of interface name 1,
- fxp0
- physical part of interface name 1,
- fxp0 interface
- configuring 1,
- management Ethernet interface 1,
- fxp1
- physical part of interface name 1,
- fxp1 interface 1,
- fxp2
- physical part of interface name 1,
G
- ge
- physical part of interface name 1,
- general (tracing flag) 1,
- Gigabit Ethernet interfaces 1, 2,
- 802.1ag 1,
- 802.3ah 1,
- autonegotiation 1,
- configuration statements 1,
- Ethernet link aggregation 1,
- example configuration 1,
- flow control 1,
- ignoring Layer 3 incomplete errors 1,
- link protection 1,
- loopback mode 1,
- MAC address filtering 1,
- MTU sizes 1, 2, 3,
- proxy ARP, unrestricted 1,
- static ARP table entries 1,
- usage guidelines 1,
- VLAN IDs 1, 2,
- VLAN tagging 1, 2, 3, 4, 5,
- VRRP 1,
- Gigabit Ethernet IQ interfaces
- configuring 1,
- MAC address accounting 1,
- MAC address filtering 1,
- policer
- example configuration 1,
- rate limiting 1, 2,
- VLAN tag stacking and rewriting 1,
- Gigabit Ethernet uPIM interfaces
- speed 1,
- gigether-options statement 1,
- usage guidelines 1,
- gr
- physical part of interface name 1,
- gratuitous ARP 1,
- gratuitous-arp-reply statement 1,
- usage guidelines 1,
- gre
- physical part of interface name 1,
- group option
- firewall filters 1,
H
- HDLC encapsulation
- Cisco HDLC encapsulation 1,
- HDLC payload scrambling
- SONET interfaces 1,
- header byte values 1,
- hello-timer statement 1,
- high-plp-max-threshold statement 1,
- high-plp-threshold statement 1,
- hold-interval statement 1,
- hold-time statement 1,
- APS
- usage guidelines 1,
- damping interface transitions
- usage guidelines 1, 2,
- SONET defect triggers
- usage guidelines 1,
- host statement 1,
I
- icons defined, notice 1,
- idle-cycle-flag statement 1,
- serial interfaces
- usage guidelines 1,
- idle-timeout
- usage guidelines 1,
- idle-timeout statement 1,
- idle-time statement 1,
- usage guidelines 1,
- IEEE 802.1p policer profile
- usage guidelines 1,
- ieee802.1p statement 1,
- ignore-all statement 1,
- usage guidelines 1,
- ignore-l3-incompletes statement 1,
- ignore statement 1,
- ignoring Layer 3 incomplete errors 1,
- ilmi statement 1,
- usage guidelines 1,
- ILMI with cell relay
- encapsulation types supported 1, 2,
- example configuration 1,
- inactivity-timeout statement 1,
- incoming-called-number statement 1,
- usage guidelines 1,
- incoming-map statement 1,
- usage guidelines 1,
- incrementing STM ID 1,
- indication-polarity statement 1,
- usage guidelines 1,
- indication statement 1,
- usage guidelines 1,
- inet6 protocol family
- interface addresses 1,
- ingress-rate-limit statement 1,
- usage guidelines 1,
- init-command-string statement 1,
- usage guidelines 1,
- initial-route-check statement 1,
- inner-tag-protocol-id statement 1,
- usage guidelines 1,
- inner-vlan-id-range statement 1,
- inner-vlan-id statement 1,
- usage guidelines 1,
- input-list statement 1,
- usage guidelines 1,
- input option
- firewall filters 1,
- policers 1,
- input-policer statement 1,
- input-priority-map statement 1,
- usage guidelines 1,
- input statement 1,
- input-three-color statement 1,
- input-vlan-map statement 1,
- usage guidelines 1,
- integrated routing and bridging interfaces See IRB
- interface 1,
- maximum-requests 1,
- quiet-period 1,
- reauthentication 1,
- retries 1,
- server-timeout 1,
- supplicant 1,
- supplicant-timeout 1,
- transmit-period 1,
- interface addresses
- logical interfaces 1,
- preferred interface addresses 1, 2,
- primary interface addresses 1, 2,
- interface-down statement 1, 2,
- interface groups 1,
- interface-mode statement 1,
- usage guidelines 1, 2,
- interface naming
- chassis, routing matrix 1,
- routing matrix 1,
- TX Matrix platform 1,
- interface preservation 1,
- interfaces 1,
- 10-Gigabit Ethernet DWDM 1,
- 10-Gigabit Ethernet framing 1,
- aggregated Ethernet 1,
- aggregated SONET 1,
- channelized E1 PRI 1,
- channelized T1 PRI 1,
- clock sources 1, 2, 3,
- configuration statements 1, 2, 3,
- container interfaces 1,
- demux underlying 1,
- descriptive text 1,
- descriptors 1,
- disabling 1, 2,
- display order in configurations 1,
- encapsulation See encapsulation
- firewall filters firewall filters 1,
- Gigabit Ethernet
- configuring 1,
- Gigabit Ethernet IQ 1,
- Gigabit Ethernet IQ policer
- example configuration 1,
- mixed VLAN tagging 1, 2, 3,
- names 1,
- overview 1, 2,
- permanent interfaces 1, 2,
- physical 1,
- services interfaces 1,
- transient interfaces 1, 2,
- interfaces (tracing flag) 1,
- interface-set statement 1,
- interfaces statement 1,
- interface statement 1,
- CoS 1,
- DLSw 1,
- IEEE 802.1ag 1,
- IEEE 802.3ah 1,
- interface-switch statement 1,
- usage guidelines 1,
- interface transitions
- damping 1, 2,
- interface-type statement 1,
- channelized OC3 IQ interfaces
- usage guidelines 1, 2,
- channelized T1 IQ interfaces
- usage guidelines 1, 2, 3,
- channelized T3 IQ interfaces
- usage guidelines 1,
- NxDS0 IQ interfaces
- usage guidelines 1,
- interleave-fragments statement 1,
- internal clock sources 1, 2, 3,
- internal Ethernet interface 1, 2,
- Internet Protocol Control Protocol See IPCP
- interval statement 1,
- inverse-arp statement 1,
- invert-data statement 1,
- ip
- physical part of interface name 1,
- IP addresses
- 128-bit 1,
- IPCP 1,
- management Ethernet interface 1,
- mapping to MAC address 1, 2,
- unnumbered interfaces 1,
- ipc (tracing flag) 1,
- IPCP 1,
- assigning PPP properties 1,
- configuring IP address 1,
- negotiating IP addresses 1,
- unnumbered interfaces 1,
- ipip
- physical part of interface name 1,
- ipsec-sa statement 1,
- IPv4 Protocol family
- interface addresses 1,
- on logical interfaces 1,
- IPv6 1,
- standards documents 1,
- transition 1,
- IPv6 Protocol family
- on logical interfaces 1,
- IQE interfaces 1,
- channelized 1,
- channelized STM1 1,
- IQ interfaces 1,
- channelized 1,
- channelized E1 1, 2,
- channelized OC12 1,
- channelized OC3 1,
- channelized STM1 1,
- channelized T3 1,
- Gigabit Ethernet 1,
- ISDN interfaces
- callback-wait-period 1,
- caller 1,
- calling-number 1,
- redial-delay 1,
- isdn-options statement 1,
- usage guidelines 1,
- ISO Protocol family 1, 2,
- ITU-T standards
- E1 interfaces 1,
- E3 interfaces 1,
J
- J-series Routers 1,
K
- keep-address-and-control statement 1,
- usage guidelines 1,
- keepalives
- disabling 1,
- keepalives statement 1,
- usage guidelines 1,
- key statement 1,
L
- l2tp-interface-id statement 1,
- LACP
- Ethernet aggregation 1,
- example configuration 1,
- interval 1,
- traceoptions 1,
- tracing operations 1,
- lacp statement 1,
- 802.3ad 1,
- usage guidelines 1,
- LAN PHY 1, 2,
- Layer 2.5 VPNs
- Ethernet 1, 2, 3, 4,
- Layer 2 bridging
- Ethernet 1,
- Layer 2 circuit cell-relay promiscuous mode
- ATM2 IQ interfaces
- example configuration 1,
- Layer 2 circuit transport mode
- ATM2 IQ interfaces
- example configuration 1,
- layer2-policer statement 1,
- Layer 2 switching cross-connect
- CCC connections 1,
- CCC encapsulation 1,
- example configuration 1,
- MPLS 1,
- router configuration 1,
- Layer 3 incomplete errors 1,
- lc
- physical part of interface name 1,
- LCC 1,
- LCP
- address and control field compression 1,
- protocol field compression 1, 2,
- lcp-restart-timer statement 1,
- usage guidelines 1,
- leaky bucket properties 1, 2,
- level statement 1,
- line 1,
- protocol 1,
- linear-red-profiles statement 1,
- linear-red-profile statement 1,
- usage guidelines 1,
- line-card chassis See LCC
- line-encoding statement 1,
- line-protocol statement 1,
- usage guidelines 1,
- line-rate statement 1,
- usage guidelines 1, 2,
- line-vlan-id statement
- usage guidelines 1,
- link-adjacency-loss statement 1,
- link aggregation 1,
- SONET interfaces 1,
- link-discovery statement 1,
- link-down statement 1,
- link-event-rate statement 1,
- link-fault management 1,
- link-fault-management statement 1,
- link-layer-overhead statement 1,
- link modes 1, 2,
- link-mode statement 1,
- usage guidelines 1, 2, 3,
- link PIC failover
- channelized OC12 IQ interfaces 1,
- channelized STM1 IQ and IQE PICs 1,
- link protection
- aggregated Ethernet interfaces 1,
- disable statement 1,
- non-revertive statement 1,
- revertive statement 1,
- link-protection statement 1,
- link speed
- Ethernet aggregation 1,
- SONET aggregation 1,
- link-speed statement 1,
- usage guidelines 1, 2, 3,
- link state replication
- APS 1,
- linktrace statement 1,
- llc2 statement 1,
- usage guidelines 1,
- LMI packets See keepalives
- lmi statement 1,
- lmi-type statement 1,
- lo
- physical part of interface name 1,
- load-interval statement 1,
- usage guidelines 1,
- load sharing
- APS 1,
- load-threshold statement 1,
- usage guidelines 1,
- local-mac statement 1,
- Local Management Interface packets See keepalives
- local name, configuring 1, 2, 3,
- local-name statement 1,
- usage guidelines 1, 2,
- local password, configuring 1, 2,
- local-password statement 1,
- local-window statement 1,
- usage guidelines 1,
- lockout statement 1,
- usage guidelines 1,
- logical-interface-policer statement 1,
- logical interface properties, statements for 1,
- logical interfaces
- accounting profiles 1,
- example configuration 1,
- CCC 1, 2,
- clear loopback detected timer 1,
- configuration statements 1,
- default router addresses 1,
- descriptive text 1,
- descriptors 1,
- disabling 1,
- encapsulation See encapsulation
- example configuration
- dynamic CAC 1,
- firewall filters 1,
- interface addresses 1, 2,
- interface bandwidth 1,
- Layer 2 switching cross-connect 1,
- logical interface properties 1,
- multipoint connections 1,
- point-to-point connections 1,
- policers 1,
- PPP over ATM encapsulation
- example configuration 1,
- PPP restart timers 1,
- preferred interface addresses 1, 2,
- primary interface addresses 1, 2,
- primary router addresses 1,
- primary router interfaces 1,
- protocol families 1, 2,
- protocol MTU 1,
- protocol redirect messages 1,
- SNMP notifications 1,
- static ARP table entries 1, 2,
- unit numbers 1,
- unnumbered interfaces 1,
- VLAN IDs 1, 2,
- logical part of interface name 1,
- logical routers See logical systems
- logical systems
- configuration statements 1,
- interfaces 1,
- logical-systems statement 1,
- usage guidelines 1,
- log-prefix statement 1,
- long-buildout statement 1,
- loopback capability 1, 2,
- E1 interfaces
- example configuration 1,
- E3 interfaces
- example configuration 1,
- serial interfaces
- example configuration 1,
- SONET interfaces
- example configuration 1,
- loopback-clear-timer statement 1,
- usage guidelines 1,
- loopback mode 1,
- loopback statement 1,
- 10-Gigabit Ethernet interfaces
- usage guidelines 1,
- Fast Ethernet interfaces
- usage guidelines 1,
- Gigabit Ethernet interfaces
- usage guidelines 1,
- serial interfaces
- usage guidelines 1,
- SONET interfaces
- usage guidelines 1,
- loopback testing 1,
- loop timing
- channelized T3 interfaces 1,
- loop-timing statement 1,
- usage guidelines 1,
- loss-priority statement 1,
- usage guidelines 1,
- loss-threshold statement 1,
- low-plp-max-threshold statement 1,
- low-plp-threshold statement 1,
- ls
- physical part of interface name 1,
- lsi
- physical part of interface name 1,
- lsq-failure-options statement 1,
M
- MAC address accounting
- Gigabit Ethernet IQ interfaces 1,
- MAC addresses
- management Ethernet interface 1, 2,
- mapping to IP addresses 1, 2,
- MAC address filtering
- Fast Ethernet interfaces 1,
- Gigabit Ethernet interfaces 1,
- Gigabit Ethernet IQ interfaces 1,
- mac-address statement 1,
- mac-learn-enable statement 1,
- usage guidelines 1,
- mac statement 1,
- usage guidelines 1,
- mac-validate statement 1,
- maintenance-association statement 1,
- maintenance-domain statement 1,
- management Ethernet interface
- configuring 1,
- configuring for M-series and T-series routing platforms 1,
- configuring J-series Gigabit Ethernet interfaces 1,
- interface speed 1,
- IP address 1,
- link modes 1, 2,
- MAC address 1,
- overview 1,
- speed 1,
- manuals
- comments on 1,
- map statement 1,
- master-only statement 1,
- usage guidelines 1,
- master routers
- VRRP 1,
- maximum-contexts statement 1,
- maximum-requests statement 1,
- maximum transmission unit See MTU
- maximum-vcs statement 1,
- max-retry statement 1,
- usage guidelines 1,
- media (tracing flag) 1,
- media MTUs 1,
- SONET interfaces 1,
- See also MTU
- member-interface-speed statement 1,
- member-interface-type statement 1,
- member-interface-speed 1,
- mep statement 1,
- minimum links for aggregation
- Ethernet links 1,
- SONET links 1,
- minimum-links statement 1,
- usage guidelines 1,
- mixed VLAN tagging 1, 2, 3,
- ml
- physical part of interface name 1,
- mlfr-uni-nni-bundle-options statement 1,
- mo
- physical part of interface name 1,
- modem-options statement 1,
- usage guidelines 1,
- mode statement 1,
- usage guidelines 1,
- monitoring services interfaces
- physical interface properties 1,
- monitor-session statement 1,
- usage guidelines 1,
- MPLS
- Layer 2 switching cross-connect 1,
- protocol family 1, 2,
- mpls statement
- 10-Gigabit Ethernet interfaces
- usage guidelines 1,
- ATM interfaces 1,
- SONET/SDH interfaces 1,
- usage guidelines 1,
- mrru statement 1,
- usage guidelines 1,
- MSP 1,
- mt
- physical part of interface name 1,
- MTU
- physical interfaces 1,
- mtun
- physical part of interface name 1,
- MTUs
- logical interfaces 1,
- media MTUs 1,
- physical interfaces 1,
- protocol MTUs 1,
- SONET interfaces 1,
- mtu statement 1,
- logical interfaces
- usage guidelines 1,
- SONET interfaces
- usage guidelines 1,
- usage guidelines 1,
- multicast-dlci statement 1,
- multicast-only statement 1,
- usage guidelines 1,
- multicast-vci statement 1,
- multilink-max-classes statement 1,
- multiplex section protection See MSP
- multipoint connections 1, 2,
- See also point-to-multipoint connections
- multipoint-destination statement 1,
- multipoint statement 1,
- usage guidelines 1,
- Multiprotocol Label Switching See MPLS
- multiservice-options statement 1,
- usage guidelines 1,
- MX-series Routers 1,
N
- n391 statement 1,
- n392 statement 1,
- n393 statement 1,
- name-format statement 1,
- names 1,
- of interfaces 1,
- native-vlan-id statement 1,
- ncp-restart-timer statement 1,
- usage guidelines 1,
- negotiate-address statement 1,
- usage guidelines 1, 2,
- negotiating IP addresses
- IPCP 1,
- negotiation-options
- allow-remote-loopback statement 1,
- no-allow-link-events statement 1,
- negotiation-options statement 1,
- neighbor statement 1,
- usage guidelines 1,
- no-allow-link-events statement 1,
- no-asynchronouus-notification statement 1,
- no-auto-negotiation statement
- Gigabit Ethernet 1,
- usage guidelines 1,
- J-series uPIM 1, 2,
- no-cbit-parity statement 1,
- no-core-dump statement 1,
- usage guidelines 1,
- no-feac-loop-respond statement 1,
- no-flow-control statement 1,
- usage guidelines 1,
- no-gratuitous-arp-reply statement 1,
- usage guidelines 1,
- no-gratuitous-arp-request statement 1,
- usage guidelines 1,
- no-keepalives statement 1,
- usage guidelines 1,
- no-long-buildout statement 1,
- no-loopback statement 1, 2,
- usage guidelines 1,
- no-loop-timing statement 1,
- usage guidelines 1,
- no-mac-learn-enable statement 1,
- usage guidelines 1,
- non-revertive statement 1,
- no-partition statement 1,
- channelized E1 IQ interfaces
- usage guidelines 1,
- channelized OC12 IQ interfaces
- usage guidelines 1, 2,
- channelized OC3 IQ interfaces
- usage guidelines 1, 2,
- channelized T3 IQ interfaces
- usage guidelines 1, 2,
- no-payload-scrambler statement 1,
- SONET interfaces
- usage guidelines 1,
- no-preempt statement 1,
- no-redirects statement 1,
- usage guidelines 1,
- normal (tracing flag)
- arp aging timer 1,
- no-source-filtering statement 1,
- usage guidelines 1, 2,
- no-syslog statement 1,
- usage guidelines 1,
- no-termination-request statement 1,
- notice icons defined 1,
- no-translate-discard-eligible statement 1,
- no-translate-fecn-and-becn statement 1,
- no-traps statement 1,
- usage guidelines 1, 2,
- no-unframed statement 1,
- no unidirectional statement 1,
- no-z0-increment statement 1,
- usage guidelines 1,
- NxDS0 IQ interfaces
- example configuration 1, 2,
- usage guidelines 1,
O
- OAM
- configuration statements 1,
- OAM cells See keepalives
- oam-liveness statement 1,
- usage guidelines 1, 2,
- oam-period statement 1,
- usage guidelines 1,
- oam statement 1,
- OC12 interfaces
- example configuration 1,
- traffic-shaping rates 1, 2, 3,
- oc3
- physical part of interface name 1,
- OC3 interfaces 1, 2, 3,
- example configuration 1,
- OC48 interfaces
- SONET header bytes 1,
- OC48 PIC
- framing 1,
- oc-slice statement 1,
- usage guidelines 1, 2,
- open-timeout statement 1,
- operating-mode statement 1,
- optics-options statement 1,
- usage guidelines 1,
- output-list statement 1,
- usage guidelines 1,
- output option
- firewall filters 1,
- policers 1,
- output-policer statement 1,
- output-priority-map statement 1,
- usage guidelines 1,
- output statement 1,
- output-three-color statement 1,
- output-vlan-map statement 1,
- usage guidelines 1,
- overflow option 1, 2,
- overflow statement 1,
- usage guidelines 1, 2,
P
- packets (tracing flag) 1,
- paired-group statement 1,
- usage guidelines 1,
- PAP
- configuring default PAP password 1,
- pap-password statement 1,
- pap statement 1,
- parentheses, in syntax descriptions 1,
- partition statement 1,
- channelized AU-4 interfaces
- usage guidelines 1,
- channelized OC3 IQ interfaces
- usage guidelines 1,
- channelized T1 IQ interfaces
- usage guidelines 1, 2, 3,
- channelized T3 IQ interfaces
- usage guidelines 1,
- NxDS0 IQ interfaces
- usage guidelines 1, 2,
- SDH (VC-4) interfaces
- usage guidelines 1,
- passive access, configuring 1, 2, 3,
- passive monitoring flow
- Ethernet interfaces 1,
- SONET/SDH interfaces 1,
- passive-monitor-mode statement 1,
- usage guidelines 1, 2,
- passive statement 1,
- usage guidelines 1, 2, 3,
- path-database-size statement 1,
- path trace identifier 1,
- path-trace statement 1,
- 10-Gigabit Ethernet interfaces
- usage guidelines 1,
- usage guidelines 1,
- payload-scrambler statement 1,
- SONET interfaces
- usage guidelines 1,
- p-bit-timeout statement 1,
- pd
- physical part of interface name 1,
- pdu-interval statement 1,
- pdu-threshold statement 1,
- pe
- physical part of interface name 1,
- peer statement 1,
- peer-unit statement 1,
- periodic statement 1,
- usage guidelines 1,
- permanent interfaces 1, 2,
- permanent virtual circuit encapsulation See ATM PVC
- per-unit-scheduler statement 1,
- pfc statement 1,
- usage guidelines 1,
- physical interfaces 1,
- accounting profiles 1,
- example configuration 1,
- APS 1,
- byte encoding 1,
- C-bit parity mode 1,
- clocking mode 1,
- clock rates 1,
- clock sources 1, 2, 3, 4,
- configuration statements 1,
- DCE 1, 2,
- descriptive text 1, 2,
- descriptors 1,
- disabling 1,
- DTR circuit 1,
- encapsulation 1,
- Ethernet link aggregation 1,
- flow control 1,
- frame checksums See frame checksums
- HDLC payload scrambling 1,
- header byte values 1,
- idle cycle flag 1,
- keepalives 1,
- leaky bucket properties 1, 2,
- line encoding 1,
- line protocol 1,
- link modes 1, 2,
- loopback capability
- serial interfaces 1,
- SONET interfaces 1,
- loopback mode 1,
- loop timing 1,
- MAC address filtering 1,
- media MTU size 1, 2,
- mixed VLAN tagging 1, 2, 3,
- MSP 1,
- path trace identifier 1,
- physical interface properties 1,
- PPP CHAP 1, 2,
- revertive mode, APS 1,
- RFC 2615 support 1,
- signal polarity 1,
- SNMP notifications 1,
- SONET defect triggers 1,
- configuration example 1,
- hold timers 1,
- SONET link aggregation 1,
- speed 1, 2, 3, 4, 5,
- statements 1,
- time slots 1,
- fractional E1 IQ and IQE interfaces 1,
- fractional E1 IQ interfaces 1,
- fractional T1 IQ interfaces 1,
- NxDS0 IQ interfaces 1,
- transitions, damping 1,
- unidirectional mode 1,
- unidirectional mode, APS 1,
- VLAN tagging 1, 2, 3,
- See also names of specific interfaces
- physical part of interface name 1,
- pic-type statement 1,
- pimd
- physical part of interface name 1,
- pime
- physical part of interface name 1,
- plp1 statement 1,
- usage guidelines 1,
- plp-to-clp statement 1,
- point-to-point connections
- logical interfaces 1,
- unnumbered Ethernet interfaces 1,
- Point-to-Point Protocol encapsulation 1,
- encapsulation overhead 1,
- keepalives 1,
- on physical interfaces 1, 2,
- PPP CHAP 1, 2,
- point-to-point statement 1,
- usage guidelines 1,
- policers
- applying 1,
- arp option 1,
- input option 1,
- logical interfaces 1,
- output option 1,
- policer statement
- CoS 1,
- interface MAC 1,
- usage guidelines 1, 2,
- policing
- Gigabit Ethernet IQ interfaces 1, 2,
- pool statement 1,
- usage guidelines 1,
- pop-all-labels statement 1,
- usage guidelines 1,
- pop-pop statement
- Gigabit Ethernet IQ interfaces 1,
- usage guidelines 1,
- pop statement
- Gigabit Ethernet IQ interfaces 1,
- usage guidelines 1,
- usage guidelines 1,
- pop-swap statement
- Gigabit Ethernet IQ interfaces 1,
- usage guidelines 1,
- Port-Based Network Access Control Protocol
- IEEE 802.1x
- dot1x 1,
- port-priority statement
- LACP 1,
- port statement
- voice services 1,
- post-service-filter statement 1,
- PPP
- address and control field compression 1,
- PPP clear loopback detected timer 1,
- protocol field compression 1,
- restart timer 1,
- PPPD processes, trace operations 1,
- PPPoE
- example configuration 1, 2,
- PPPoE client
- example configuration 1,
- pppoe-options statement 1,
- usage guidelines 1, 2,
- PPPoE server
- example configuration 1,
- ppp-options statement 1,
- usage guidelines 1, 2,
- PPP over ATM encapsulation
- example configuration 1,
- PPP properties, assigning
- IPCP 1,
- preempt statement 1,
- preferred interface addresses 1, 2,
- preferred-source-address statement 1,
- example 1,
- usage guidelines 1,
- preferred statement 1,
- usage guidelines 1, 2,
- premium statement 1,
- usage guidelines 1, 2, 3,
- preserve interfaces statement
- usage guidelines 1,
- preserve-interface statement 1,
- primary interface addresses 1, 2,
- primary router addresses 1,
- primary router interfaces 1,
- primary statement
- address for interface 1,
- usage guidelines 1,
- interface for routing platform 1,
- usage guidelines 1,
- priority (IEEE 802.1ag OAM) statement 1,
- priority-cost statement 1,
- priority statement 1,
- usage guidelines
- ATM scheduler map 1,
- promiscuous-mode statement 1,
- usage guidelines 1,
- protect circuit, APS
- configuring 1,
- load sharing between paired groups 1,
- paired groups, switching between 1,
- protect-circuit statement 1,
- usage guidelines 1,
- protocol-down statement 1,
- protocol families
- configuration statements 1,
- logical interfaces 1, 2,
- protocol MTUs 1,
- unnumbered interfaces 1,
- protocol field compression 1,
- protocol MTUs 1,
- logical interfaces 1,
- See also MTU
- protocol redirect messages 1,
- protocols
- families 1,
- line 1,
- protocols connections
- configuration statements 1, 2,
- protocols dot1x
- configuration statements 1,
- protocols OAM
- configuration statements 1,
- protocols statement 1,
- protocols VRRP
- configuration statements 1, 2,
- proxy-arp statement 1,
- usage guidelines 1,
- proxy statement 1,
- usage guidelines 1,
- push-push statement
- Gigabit Ethernet IQ interfaces 1,
- usage guidelines 1,
- push statement
- Gigabit Ethernet IQ interfaces 1,
- usage guidelines 1,
- usage guidelines 1,
- PVC encapsulation See ATM PVC encapsulation
Q
- QPP interfaces channelized IQ and IQE interfaces 1,
- queue-depth statement 1,
- queue-length statement 1,
- queues statement 1,
- quiet-period statement 1,
R
- rate statement 1,
- usage guidelines 1, 2,
- reassemble-packets statement 1,
- reauthentication statement 1,
- receive (tracing flag modifier) 1,
- receive-bucket statement 1,
- usage guidelines 1, 2,
- receive-options-packets statement 1,
- usage guidelines 1, 2,
- receive-ttl-exceeded statement 1,
- usage guidelines 1, 2,
- red-differential-delay statement 1,
- redial-delay statement 1,
- redirect messages 1,
- redundancy-options statement 1, 2,
- remote-loopback-respond statement 1,
- remote-loopback statement 1,
- remote-mep statement 1,
- remote statement 1,
- usage guidelines 1, 2, 3,
- request statement 1,
- required-depth statement 1,
- usage guidelines 1,
- retries statement 1,
- revertive mode, APS 1,
- revertive statement 1,
- revert-time statement 1,
- usage guidelines 1,
- rewrite-on-egress statement
- usage guidelines 1,
- rewrite-on-ingress statement
- usage guidelines 1,
- rfc-2615 statement 1,
- usage guidelines 1,
- RFC 2615 support, SONET interfaces 1,
- routers
- default addresses 1,
- primary addresses 1,
- primary interfaces 1,
- routing-instance statement 1,
- routing matrix
- chassis, interface naming 1,
- interface naming 1,
- rpf-check statement 1,
- usage guidelines 1,
- rsp
- physical part of interface name 1,
- rtp statement 1,
- rts-polarity statement 1,
- usage guidelines 1,
- rts statement 1,
- usage guidelines 1, 2,
- rtvbr statement 1,
S
- s1 SONET header byte 1,
- sampling on aggregated links 1,
- example configuration 1,
- sampling statement 1,
- SCC 1,
- scheduler-maps statement 1,
- schedulers statement 1,
- SDH (VC-4) interfaces
- example configuration 1,
- SDH (VC-4-4C) interface
- example configuration 1,
- SDH interfaces 1, 2,
- configuration statements 1,
- framing 1,
- MTU sizes 1, 2, 3,
- overview 1, 2,
- physical properties 1,
- See also SONET interfaces
- se
- physical part of interface name 1,
- secondary statement 1,
- send (tracing flag modifier) 1,
- send-critical-event statement 1,
- separators, in interface names 1,
- serial interfaces
- clocking mode 1, 2,
- clock rates 1,
- configuration statements 1,
- control leads 1,
- correcting phase shift 1,
- default settings 1,
- DTR circuit 1,
- idle cycle flag 1,
- invalid statements 1,
- line encoding 1,
- line protocol 1,
- loopback capability 1,
- physical interface properties 1,
- signal polarity 1,
- serial-options statement 1,
- usage guidelines 1,
- server statement 1,
- server-timeout statement 1,
- service-domain statement 1,
- service-filter statement 1,
- service-name statement 1,
- usage guidelines 1,
- service-set statement 1,
- services interfaces 1,
- services-options statement 1,
- services statement 1,
- service statement 1,
- shaping statement 1,
- SHDSL 1,
- shdsl-options statement 1,
- usage guidelines 1,
- short-name-format statement 1,
- short-sequence statement 1,
- signal polarity, serial interfaces 1,
- snext statement 1,
- usage guidelines 1,
- snr-margin statement 1,
- usage guidelines 1,
- so
- physical part of interface name 1,
- SONET/SDH interfaces
- interface speed 1, 2,
- passive monitoring 1,
- SONET interfaces 1, 2,
- APS 1, 2,
- clock sources 1, 2,
- configuration statements 1,
- damping interface transitions 1,
- defect triggers 1,
- configuration example 1
- hold timers 1
- encapsulation 1, 2,
- example configuration 1,
- frame checksum 1,
- framing 1,
- HDLC payload scrambling 1,
- header byte values 1,
- incrementing STM ID 1,
- leaky bucket properties 1,
- link aggregation 1,
- loopback capability 1,
- MTU sizes 1, 2, 3, 4,
- overview 1, 2,
- path trace identifier 1,
- physical interface properties 1,
- RFC 2615 support 1,
- MTU sizes 1, 2, 3,
- See also SDH interfaces
- sonet-options statement 1,
- usage guidelines 1, 2, 3,
- SONET parameters
- on channelized OC12 interfaces 1,
- source address filtering
- Fast Ethernet interfaces 1, 2, 3,
- Gigabit Ethernet interfaces 1, 2, 3,
- source-address-filter statement 1,
- usage guidelines 1, 2,
- source-class usage
- example configuration 1,
- source-class-usage statement 1,
- usage guidelines 1,
- source-filtering statement 1,
- usage guidelines 1, 2, 3, 4,
- source statement 1,
- sp
- physical part of interface name 1,
- speed statement 1, 2,
- usage guidelines 1, 2, 3, 4, 5, 6,
- spid1 statement 1,
- spid2 statement 1,
- stacked-vlan-tagging statement 1,
- usage guidelines 1,
- start-end-flag statement 1,
- startup-silent-period statement 1,
- state (tracing flag) 1,
- statement
- usage guidelines 1,
- static ARP table entries
- Ethernet interfaces 1, 2,
- example configuration 1,
- static routes
- unnumbered Ethernet interfaces 1,
- static-tei-val statement 1,
- STM1 interfaces
- example configuration 1,
- supplicant statement
- single 1,
- supplicant-timeout statement 1,
- support, technical See technical support
- swap-push statement
- Gigabit Ethernet IQ interfaces 1,
- usage guidelines 1,
- swap statement
- Gigabit Ethernet IQ interfaces 1,
- usage guidelines 1
- swap-swap statement
- Gigabit Ethernet IQ interfaces 1,
- usage guidelines 1,
- switch-card chassis SCC 1,
- switching-mode statement 1,
- usage guidelines 1,
- switch-options statement 1,
- switch-port statement
- access switching 1,
- switch-type statement 1,
- symbol-period statement 1,
- Synchronous Digital Hierarchy See SDH interfaces
- Synchronous Optical Network See SONET interfaces
- syntax conventions 1,
- syslog statement 1,
- usage guidelines 1,
- system-priority statement
- LACP
- interface 1
- system processes
- configuration statements 1,
T
- t1
- physical part of interface name 1,
- T1 interfaces
- byte encoding 1,
- configuration statements 1,
- overview 1,
- time slots
- example configuration 1
- MTU sizes 1, 2, 3,
- T1 IQ interfaces
- example configuration 1,
- t1-options statement 1,
- usage guidelines 1,
- t1-time statement 1,
- usage guidelines 1,
- t2-time statement 1,
- usage guidelines 1,
- t3
- physical part of interface name 1,
- t310 statement 1,
- usage guidelines 1,
- t391 statement 1,
- t392 statement 1,
- T3 interfaces
- C-bit parity mode 1,
- configuration statements 1,
- encapsulation 1,
- overview 1,
- MTU sizes 1, 2, 3,
- t3-options statement 1,
- usage guidelines 1,
- T640 routing nodes 1,
- tag-protocol-id statement 1,
- usage guidelines 1, 2,
- tap
- physical part of interface name 1,
- TCC 1,
- encapsulation 1,
- technical support
- contacting JTAC 1,
- tei-option statement 1,
- threshold statement 1,
- usage guidelines 1, 2,
- timer (tracing flag)
- Ethernet interface speed 1,
- timers
- APS 1,
- time slots
- channelized E1 IQ and IQE interfaces 1,
- channelized E1 IQ interfaces 1,
- channelized NxDS0 IQ interfaces 1, 2,
- E1 interfaces
- example configuration 1
- fractional E1 IQ and IQE interfaces 1,
- fractional E1 IQ interfaces 1,
- fractional T1 IQ interfaces 1, 2,
- T1 interfaces
- example configuration 1
- timeslots statement 1,
- channelized E1 IQ and IQE interfaces
- usage guidelines 1
- channelized E1 IQ interfaces
- usage guidelines 1
- channelized NxDS0 IQ interfaces
- usage guidelines 1, 2
- fractional E1 IQ and IQE interfaces
- usage guidelines 1
- fractional E1 IQ interfaces
- usage guidelines 1
- fractional T1 IQ interfaces
- usage guidelines 1, 2
- NxDS0 IQ interfaces
- usage guidelines 1
- tm-polarity statement 1,
- usage guidelines 1,
- tm statement 1,
- usage guidelines 1,
- trace operations
- PPPD 1,
- VRRP 1,
- traceoptions (LACP) statement
- usage guidelines 1,
- traceoptions statement
- interface processes 1,
- interfaces 1,
- usage guidelines 1
- LACP 1,
- PPPD 1,
- PPPD processes
- usage guidelines 1
- VRRP
- usage guidelines 1
- tracing flags
- all 1,
- event 1,
- ipc 1,
- media 1,
- tracing operations
- BGP 1,
- LACP 1,
- PPPD 1,
- track statement
- DLSw 1,
- usage guidelines 1
- transient interfaces 1, 2,
- transitions
- damping 1,
- transitions, damping 1,
- translate-discard-eligible statement 1,
- translate-fecn-and-becn statement 1,
- translational cross-connect See TCC
- translational cross-connect encapsulation See TCC, encapsulation
- transmit-bucket statement 1,
- usage guidelines 1, 2,
- transmit clock sources 1, 2,
- transmit-clock statement 1,
- usage guidelines 1,
- transmit-period statement 1,
- transmit-weight statement 1,
- usage guidelines 1,
- traps statement 1,
- usage guidelines 1, 2,
- trej-time statement 1,
- usage guidelines 1,
- trigger-link-failure statement 1,
- trigger statement 1,
- 10-Gigabit Ethernet interfaces
- usage guidelines 1
- usage guidelines 1,
- Tri-Rate Ethernet copper interfaces
- speed 1,
- Tri-Rate Ethernet interfaces
- interface speed 1,
- Trivial Network Protocol family
- interface addresses 1,
- on logical interfaces 1,
- trunk-bandwidth statement 1,
- trunk-id statement 1,
- trunk interface 1,
- interface-mode statement 1,
- vlan-id-list statement 1,
- trunk port 1, 2, 3,
- ttl statement 1,
- tunnel statement 1,
- TX Matrix platform
- interface naming 1,
- chassis 1
U
- umd
- physical part of interface name 1,
- underlying interfaces
- specifying family type for 1,
- underlying-interface statement 1,
- unframed statement 1,
- unicast RPF 1,
- example configuration 1,
- fail filters 1, 2,
- loose mode 1,
- routing asymmetry 1,
- strict mode 1,
- VPNs 1,
- example configuration 1
- unidirectional mode, APS 1,
- unidirectional statement 1,
- unit numbers 1,
- unit statement
- logical interfaces 1,
- usage guidelines 1, 2
- unnumbered-address statement 1,
- preferred source address
- usage guidelines 1
- usage guidelines 1, 2,
- unnumbered interfaces
- demux 1,
- Ethernet 1,
- preferred source address 1
- IPCP 1,
- point-to-point 1,
- unnumbered-interface statement
- usage guidelines 1, 2,
- up-count statement 1,
- uPIM Ethernet interfaces 1,
- USB modem
- configuring 1,
V
- vbr statement 1,
- vc4
- physical part of interface name 1,
- vc-cos-mode statement 1,
- vci-range statement 1,
- VCIs 1,
- vci statement 1,
- VCs 1,
- virtual circuits See ATM VCs
- virtual paths See ATM VPs
- Virtual Router Redundancy Protocol See VRRP
- VLAN CCC
- configuration guidelines 1,
- example configuration 1, 2,
- VLAN CCC encapsulation
- encapsulation overhead 1, 2,
- physical interfaces 1,
- vlan-id-list statement 1,
- usage guidelines 1,
- vlan-id-range statement 1,
- Ethernet interfaces 1,
- VLAN IDs 1, 2,
- vlan-id statement 1, 2,
- Ethernet interfaces 1,
- usage guidelines 1, 2
- Fast Ethernet interfaces
- usage guidelines 1, 2
- Gigabit Ethernet interfaces
- usage guidelines 1
- usage guidelines 1,
- VLAN tagging 1, 2, 3,
- vlan-tagging statement 1,
- Ethernet interfaces
- usage guidelines 1, 2
- Fast Ethernet interfaces
- usage guidelines 1, 2
- Gigabit Ethernet interfaces
- usage guidelines 1
- vlan-tags-outer statement 1,
- vlan-tags statement 1,
- usage guidelines 1
- VLAN tag stacking and rewriting
- Gigabit Ethernet IQ interfaces 1
- vlan-vci-ccc encapsulation
- ATM-to-Ethernet interworking 1
- vlan-vci-tagging statement 1,
- ATM-to-Ethernet interworking 1
- VLAN VPLS
- configuration guidelines 1
- example configuration 1, 2
- voice over IP
- dynamic CAC 1
- VPIs 1,
- vpi statement 1, 2,
- vpls protocol family
- interface addresses 1
- on logical interfaces 1
- VPNs
- unicast RPF 1
- VPs 1,
- VRRP 1,
- configuration statements 1, 2
- trace operations 1
- tracing flag 1
- vsp
- physical part of interface name 1
- vt
- physical part of interface name 1
- VT mapping
- channelized T1 IQ interfaces 1, 2, 3, 4
- vtmapping statement 1,
- usage guidelines 1
W
- WAN PHY 1,
- configuring 1
- watch-list statement 1,
- usage guidelines 1
- wavelength-division multiplexing See WDM
- wavelength statement 1,
- usage guidelines 1
- WDM 1, 2,
- working circuit, APS
- configuring 1
- load sharing between paired groups 1
- paired groups, switching between 1
- working-circuit statement 1,
- usage guidelines 1
X
- xe
- physical part of interface name 1
Y
- yellow-differential-delay statement 1,
Z
- z0-increment statement 1,
- usage guidelines 1
- z3 SONET header byte 1
- z4 SONET header byte 1