[Contents] [Prev] [Next] [Index] [Report an Error]

Specifying an Aggregated Interface

The M-series, MX-series, and T-series routing platforms support aggregated interfaces.

You specify aggregated interfaces by assigning a number for the aggregated interface. For aggregated Ethernet interfaces, configure aex as in the following example:



[edit interfaces]
ae0 {
...
}

For aggregated SONET/SDH interfaces, configure asx as in the following example:



[edit interfaces]
as0 {
...
}

The maximum number of aggregated Ethernet interfaces is 128, and the assigned number can be from 0 through 127. The maximum number of aggregated SONET interfaces is 16, and the assigned number can be from 0 through 15. You should not mix SONET and SDH modes on the same aggregated interface.

Note: SONET/SDH aggregation is proprietary to the JUNOS software and might not work with other software.

If you are configuring VLANs for aggregated Ethernet interfaces, you must include the vlan-tagging statement at the [edit interfaces aex] hierarchy level to complete the association.

For more information, see Configuring Aggregated Ethernet Interfaces and Configuring Aggregated SONET/SDH Interfaces.

[Contents] [Prev] [Next] [Index] [Report an Error]