[Contents] [Prev] [Next] [Index] [Report an Error]

serial-options

Syntax



serial-options {

clock-rate rate;

clocking-mode (dce | loop);

control-polarity (negative | positive);

cts-polarity (negative | positive);

dcd-polarity (negative | positive);



dce-options {

control-signal (assert | de-assert |
normal);

cts (ignore | normal | require);

dcd (ignore | normal | require);

dsr (ignore | normal | require);

dtr signal-handling-option;

ignore-all;

indication (ignore | normal | require);

rts (assert | de-assert |
normal);

tm (ignore | normal | require);
}



dsr-polarity (negative | positive);



dte-options {

control-signal (assert | de-assert |
normal);

cts (ignore | normal | require);

dcd (ignore | normal | require);

dsr (ignore | normal | require);

dtr signal-handling-option;

ignore-all;

indication (ignore | normal | require);

rts (assert | de-assert |
normal);

tm (ignore | normal | require);
}



dtr-circuit (balanced | unbalanced);

dtr-polarity (negative | positive);

encoding (nrz | nrzi);

indication-polarity (negative | positive);

line-protocol protocol;

loopback (dce-local | dce-remote
| local | remote);

rts-polarity (negative | positive);

tm-polarity (negative | positive);

transmit-clock invert;
}

Hierarchy Level



[edit interfaces se-pim/0/port]

Release Information

Statement introduced prior to JUNOS Release 7.4.

Description

Configure serial-specific interface properties.

The statements are explained separately.

Usage Guidelines

See Configuring Serial Interfaces.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.