[Contents] [Prev] [Next] [Index] [Report an Error]

primary

See the following sections:

primary (Address on Interface)

Syntax

primary;

Hierarchy Level

[edit interfaces interface-name unit logical-unit-number family family address address],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number family family address address]

Release Information

Statement introduced before JUNOS Release 7.4.

Description

Configure this address to be the primary address of the protocol on the interface. If the logical unit has more than one address, the primary address is used by default as the source address when packets originate from the interface and the destination does not indicate the subnet.

Default

For unicast traffic, the primary address is the lowest non-127 preferred address on the unit.

Usage Guidelines

See Configuring the Interface Address.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

primary (AS PIC or MultiServices PIC Interfaces)

Syntax

primary interface-name;

Hierarchy Level

[edit interfaces (rsp0 | rsp1) redundancy-options]

Release Information

Statement introduced before JUNOS Release 7.4.

Description

Specify the primary AS PIC or MultiServices PIC interface.

Options

interface-name—The identifier for the AS PIC interface or MultiServices PIC interface, which must be of the form sp-fpc/pic/port.

Usage Guidelines

See the JUNOS Services Interfaces Configuration Guide.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

[Contents] [Prev] [Next] [Index] [Report an Error]

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.