partition

Syntax

Hierarchy Level

Release Information

Statement introduced before JUNOS Release 7.4.

Description

For IQ interfaces and J-series interfaces on the Dual-Port Channelized E1 and T1PIM, configure the channelized interface partition. The partition number is correlated with the channel number. Partition and channel numbering on IQ interfaces begins with :1, not :0.

Default

If you omit this statement, the channelized PIC or PIM is not partitioned, and no data channels are configured.

Options

partition-number—Sublevel interface partition index.

Ranges:

• 1 through 4 for an OC3 interface on a channelized OC12 IQ interface.
• 1 through 12 for a T3 interface on a channelized OC12 IQ interface.
• 1 through 4 for a a T3 interface on a channelized T3 IQ interface.
• 1 through 28 for a T1 IQ interface on a channelized OC12 IQ or channelized T3 IQ interface.
• 1 through 10 for an E1 interface on a channelized E1 IQ interface.
• 1 through 30 on a channelized E1 interface.
• 1 through 23 on a channelized T1 interface.
• 1 through 24 for NxDS0 interfaces on either channelized OC12 IQ or channelized DS3 IQ interfaces.
• 0 through 31(with 0 reserved for framing) for NxDS0 interfaces on channelized E1 IQ interfaces.

The remaining statements are explained separately.

Usage Guidelines

See Configuring Channelized E1 Interfaces, Configuring Channelized OC12 Interfaces, and Configuring Channelized T3 Interfaces.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

Related Topics

 no-partition

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.