[Contents] [Prev] [Next] [Index] [Report an Error]

multipoint-destination

Syntax



multipoint-destination address dlci dlci-identifier;
multipoint-destination address {

epd-threshold cells;

inverse-arp;



oam-liveness {
up-count cells;
down-count cells;
}



oam-period (disable | seconds);



shaping {
(cbr rate | rtvbr peak rate sustained rate burst length | vbr peak rate sustained rate burst length);

queue-length number;
}



vci vpi-identifier.vci-identifier;
}

Hierarchy Level



[edit interfaces interface-name unit logical-unit-number family family address address],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number family family address address]

Release Information

Statement introduced before JUNOS Release 7.4.

Description

For point-to-multipoint Frame Relay or ATM interfaces only, enable the support of multicast on the interface. You can configure multicast support on the interface if the Frame Relay or ATM switch performs multicast replication.

Options

address—Address of the remote side of the point-to-multipoint connection.
dlci-identifier—For Frame Relay interfaces, the data-link connection identifier.
vci-identifier—For ATM interfaces, the virtual circuit identifier.
vpi-identifier—For ATM interfaces, the virtual path identifier.
The remaining statements are explained separately.

Usage Guidelines

See Configuring a Point-to-Point ATM1 or ATM2 IQ Connection, and Configuring a Point-to-Multipoint Frame Relay Connection.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.