[Contents] [Prev] [Next] [Index] [Report an Error]

maximum-vcs

Syntax



maximum-vcs maximum-vcs;

Hierarchy Level



[edit interfaces at-fpc/pic/port atm-options vpi vpi-identifier]

Release Information

Statement introduced before JUNOS Release 7.4.

Description

For ATM1 interfaces, configure the maximum number of virtual circuits (VCs) allowed on a virtual path (VP). When configuring ATM1 interfaces on the routing platform, you must include this statement.

For a configured virtual path identifier (VPI), valid virtual channel identifier (VCI) numbers are from 0 through (maximum-vcs value – 1). VCI numbers 0 through 31 are reserved by the ATM Forum. It is recommended that you use a VCI number higher than 31 when connecting to an ATM switch.

Options

maximum-vcs—Maximum number of VCs on the VP.

Usage Guidelines

See Configuring the Maximum Number of ATM1 VCs on a VP.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.