[Contents] [Prev] [Next] [Index] [Report an Error]

Logical Interfaces Statements List

Table 25 lists statements that you can use to configure logical interfaces.

Table 25: Statements for Logical Interface Properties

Statement	Interface Types	Usage Guidelines
`access-profile name`	ATM2 IQ interfaces	Configuring PPP PAP Authentication
`accept-source-mac`	Gigabit Ethernet intelligent queuing (IQ) interfaces	Configuring MAC Address Filtering
`accounting-profile name`	All	Configuring Accounting for the Logical Interface
`ack-delay-time time`	Ethernet interfaces configured for DLSw	Configuring LLC2 Options
`ack-max count`	Ethernet interfaces configured for DLSw	Configuring LLC2 Options
`activation-delay seconds`	ISDN interfaces	Configuring ISDN Interfaces
`activation-priority priority`	Fast Ethernet and Gigabit Ethernet interfaces, ISDN BRI interfaces, and serial interfaces with PPP or Frame Relay encapsulation on J4350 and J6350 Services Routers supporting voice over IP with the TGM550 media gateway module	Configuring Dynamic Call Admission Control
`adaptive-shapers adaptive-shaper-name`	Frame Relay interfaces on J-series Services Routers	JUNOS Class of Service Configuration Guide
`allow-any-vci`	Asynchronous Transfer Mode (ATM) interfaces	Configuring ATM Interface Encapsulation
`atm-scheduler-map (map-name \| default)`	ATM2 IQ interfaces	Configuring ATM2 IQ VC Tunnel CoS Components
`backup-destination address`	Encryption interfaces	JUNOS Class of Service Configuration Guide
`backup-options`	J-series Services Routers ISDN interfaces	Configuring an ISDN Dialer Interface as a Backup Interface
`bandwidth rate`	All interfaces, except multilink and aggregated	Configuring the Interface Bandwidth
`bearer-bandwidth-limit kilobits-per-second`	Fast Ethernet and Gigabit Ethernet interfaces, ISDN BRI interfaces, and serial interfaces with PPP or Frame Relay encapsulation on J4350 and J6350 Services Routers supporting voice over IP with the TGM550 media gateway module	Configuring Dynamic Call Admission Control
`cbr rate`	ATM interfaces	Defining the ATM Traffic-Shaping Profile
`cell-bundle-size cells`	ATM2 IQ interfaces	Configuring the Layer 2 Circuit Cell-Relay Cell Maximum
`clear-dont-fragment-bit`	Adaptive services interfaces	JUNOS Services Interfaces Configuration Guide
`compression`	AS PIC or MultiServices PIC link services IQ interfaces (lsq) and voice services interfaces	JUNOS Services Interfaces Configuration Guide
`compression-device interface-name`	J-series Services Routers E1 and T1 interfaces.	JUNOS Services Interfaces Configuration Guide
`copy-tos-to-outer-ip-header`	GRE tunnel interfaces	JUNOS Class of Service Configuration Guide
`deactivation-delay seconds`	ISDN interfaces	Configuring ISDN Interfaces
`demux-destination family`	IP demux interfaces	Specifying the IP Demux Underlying Interface Family Type
`demux-options family`	IP demux interfaces	Specifying the Demux Underlying Interface
`demux-source family`	IP demux interfaces	Specifying the IP Demux Underlying Interface Family Type
`description text`	All	Adding a Logical Unit Description to the Configuration
`destination (address \| routing-instance-name)`	Encryption generic routing encapsulation (GRE) tunnel, and IP tunnel interfaces	JUNOS Services Interfaces Configuration Guide
`dialer-options`	Adaptive services interfaces on M7i routing platforms J-series Services Routers ISDN interfaces	JUNOS Services Interfaces Configuration Guide Configuring ISDN Physical Interface Properties
`disable`	All	Disabling a Logical Interface
`disable-mlppp-inner-ppp-pfc`	MLPPP interfaces	JUNOS Services Interfaces Configuration Guide
`dlci dlci-identifier`	Point-to-point interfaces with Frame Relay encapsulation	Configuring Frame Relay DLCIs
`drop-timeout milliseconds`	Multilink interfaces	JUNOS Services Interfaces Configuration Guide
`dynamic-call-admission-control`	Fast Ethernet and Gigabit Ethernet interfaces, ISDN BRI interfaces, and serial interfaces with PPP or Frame Relay encapsulation on J4350 and J6350 Services Routers supporting voice over IP with the TGM550 media gateway module	Configuring Dynamic Call Admission Control
`encapsulation type`	All interfaces, except aggregated SONET/SDH and loopback	Configuring the Encapsulation on a Logical Interface
`epd-threshold cells`	ATM2 IQ interfaces	Configuring the ATM2 IQ EPD Threshold
`f-max-period number`	AS PIC or MultiServices link services IQ interfaces (lsq-) and voice services interfaces	JUNOS Services Interfaces Configuration Guide
`family`	All	Configuring the Protocol Family
`fragment-threshold bytes`	Multilink interfaces	JUNOS Services Interfaces Configuration Guide
`frame-relay map-name \| default)`	Frame Relay Interfaces on J-series Services Routers	JUNOS Services Interfaces Configuration Guide and JUNOS Class of Service Configuration Guide
`idle-time time`	Ethernet interfaces configured for DLSw	Configuring LLC2 Options
`idle-timeout`	ISDN interfaces	Configuring Bandwidth on Demand
`initial-route-check seconds`	ISDN interfaces	Configuring ISDN Logical Interface Properties
`inner-tag-protocol-id`	Gigabit Ethernet IQ interfaces	Configuring 802.1Q VLANs
`inner-vlan-id`	Gigabit Ethernet IQ interfaces	Configuring 802.1Q VLANs
`inner-vlan-id-range`	Gigabit Ethernet, 10-Gigabit Ethernet, and aggregated Ethernet IQ interfaces	Configuring ATM-to-Ethernet Interworking
`input`	AS PIC or MultiServices link services	JUNOS Services Interfaces Configuration Guide
`input-policer policer-name`	For 1-Gigabit Ethernet and 10-Gigabit Ethernet IQ2 interfaces on M-series and T-series routing platforms	JUNOS Services Interfaces Configuration Guide and Applying a Policer
`input-three-color policer-name`	For 1-Gigabit Ethernet and 10-Gigabit Ethernet IQ2 interfaces on M-series and T-series routing platforms	JUNOS Class of Service Configuration Guide and Applying a Policer
`input-vlan-map`	Gigabit Ethernet IQ interfaces	Configuring the Management Ethernet Interface
`interleave-fragments`	Link services interfaces	JUNOS Services Interfaces Configuration Guide
`inverse-arp`	Interfaces with ATM and Frame Relay encapsulation	Configuring Inverse ATM1 or ATM2 ARP and Configuring Inverse Frame Relay ARP
`key number`	GRE tunnel interfaces on Adaptive Services PICs	JUNOS Services Interfaces Configuration Guide
`layer2-policer`	1-Gigabit Ethernet and 10-Gigabit Ethernet IQ2 interfaces	Applying a Policer
`lcp-restart-timer`	Interfaces with PPP encapsulation	Configuring the PPP Restart Timers
`l2tp-interface-id name`	Adaptive services interfaces	JUNOS Services Interfaces Configuration Guide
`link-layer-overhead percent`	AS PIC or MultiServices link services IQ interfaces (lsq)	JUNOS Services Interfaces Configuration Guide
`llc2`	Ethernet interfaces configured for DLSw on J-series Services Routers	Configuring LLC2 Options
`load-threshold number`	ISDN interfaces	Configuring Bandwidth on Demand
`local-name name`	ATM2 IQ interfaces	Configuring PPP CHAP Authentication and Configuring PPP PAP Authentication
`local-window count`	Ethernet interfaces configured for DLSw	Configuring LLC2 Options
`loss-priority-maps`	Frame Relay interfaces on J-series Services Routers	JUNOS Services Interfaces Configuration Guide and JUNOS Class of Service Configuration Guide
`mac-address mac-address`	Gigabit Ethernet IQ interfaces and Gigabit Ethernet interfaces with small form-factor pluggable transceivers (SFPs) (except the 10-port Gigabit Ethernet PIC and the built-in Gigabit Ethernet port on the M7i platform)	Configuring MAC Address Filtering
`max-retry count`	Ethernet interfaces configured for DLSw	Configuring LLC2 Options
`minimum-links number`	Multilink interfaces	JUNOS Services Interfaces Configuration Guide
`mrru bytes`	Multilink interfaces	JUNOS Services Interfaces Configuration Guide
`multicast-dlci dlci-identifier`	Point-to-multipoint Frame Relay interfaces	Configuring a Multicast-Capable Frame Relay Connection
`multicast-vci vpi-identifiervci-identifier`	Point-to-multipoint ATM1 and ATM2 IQ interfaces	Configuring the ATM OAM F5 Loopback Cell Threshold
`multilink-max-classes number`	AS PIC or MultiServices link services IQ interfaces (lsq-)	JUNOS Services Interfaces Configuration Guide
`multipoint`	All	Configuring a Multipoint Connection
`ncp-restart-timer`	Interfaces with PPP encapsulation	Configuring the PPP Restart Timers
`oam-liveness`	ATM1 and ATM2 IQ interfaces	Configuring the ATM OAM F5 Loopback Cell Threshold
`oam-period (disable \| seconds)`	ATM1 and ATM2 IQ interfaces	Defining the ATM OAM F5 Loopback Cell Period
`output`	All	JUNOS Services Interfaces Configuration Guide
`output-policer policer-name`	For 1-Gigabit Ethernet and 10-Gigabit Ethernet IQ2 interfaces on M-series and T-series routing platforms	JUNOS Class of Service Configuration Guide and Applying a Policer
`output-three-color policer-name`	For 1-Gigabit Ethernet and 10-Gigabit Ethernet IQ2 interfaces on M-series and T-series routing platforms	JUNOS Class of Service Configuration Guide and Applying a Policer
`output-vlan-map`	Gigabit Ethernet IQ interfaces	Configuring the Management Ethernet Interface
`passive`	ATM2 IQ interfaces	Configuring PPP CHAP Authentication and Configuring PPP PAP Authentication
`passive-monitor-mode`	SONET/SDH interfaces	Enabling Passive Monitoring on SONET/SDH Interfaces
`p-bit-timeout time`	Ethernet interfaces configured for DLSw	Configuring LLC2 Options
`peer-unit unit-number`	Logical tunnel interfaces	JUNOS Services Interfaces Configuration Guide
`pfc`	Interfaces with PPP, PPP CCC, or PPP TCC encapsulation	Configuring the PPP Protocol Field Compression
`plp1 cells`	ATM2 IQ interfaces	Configuring the ATM2 IQ EPD Threshold
`plp-to-clp`	ATM2 IQ interfaces	Enabling the PLP Setting to Be Copied to the CLP Bit
`point-to-point`	All	Configuring a Point-to-Point Connection
`policer`	Gigabit Ethernet IQ and Gigabit Ethernet PICs with SFPs (except the 10-port Gigabit Ethernet PIC and the built-in Gigabit Ethernet port on the M7i platform)	Configuring MAC Address Filtering
`pop`	Gigabit Ethernet IQ interfaces	Removing a VLAN Tag
`pop-pop`	Gigabit Ethernet IQ interfaces	Removing the Outer and Inner VLAN Tags
`pop-swap`	Gigabit Ethernet IQ interfaces	Removing the Outer VLAN Tag and Rewriting the Inner VLAN Tag
`port`	AS PIC or MultiServices or MultiServices link services IQ interfaces (lsq) and voice services interfaces	JUNOS Services Interfaces Configuration Guide
`ppp-options`	Interfaces with PPP, PPP CCC, or PPP TCC encapsulation	Configuring PPP CHAP Authentication and Configuring PPP PAP Authentication
`proxy-arp`	Ethernet interfaces	Configuring Unrestricted Proxy ARP
`push`	Gigabit Ethernet IQ interfaces	Stacking a VLAN Tag
`push-push`	Gigabit Ethernet IQ interfaces	Stacking Two VLAN Tags
`queue-length number`	ATM1 interfaces	Configuring the ATM1 Queue Length
`queues [ queue-numbers ]`	AS PIC or MultiServices link services IQ interfaces (lsq) and voice services interfaces	JUNOS Services Interfaces Configuration Guide
`routing-instance`	GRE tunnel and IP tunnel interfaces	JUNOS Services Interfaces Configuration Guide
`rtp`	AS PIC or MultiServices link services IQ interfaces (lsq) and voice services interfaces	JUNOS Services Interfaces Configuration Guide
`rtvbr peak rate sustained rate burst length`	ATM2 interfaces	Configuring ATM2 IQ Real-Time VBR
`service-domain (inside \| outside)`	Adaptive services interfaces	JUNOS Services Interfaces Configuration Guide
`shaping`	ATM1 and ATM2 IQ interfaces	Defining the ATM Traffic-Shaping Profile
`short-sequence`	Multilink interfaces	JUNOS Services Interfaces Configuration Guide
`source source-address`	Encryption, GRE tunnel, and IP tunnel interfaces	JUNOS Services Interfaces Configuration Guide
`swap`	Gigabit Ethernet IQ interfaces	Configuring Frames with Particular TPIDs to Be Processed as Tagged Frames
`swap-push`	Gigabit Ethernet IQ interfaces	Rewriting a VLAN Tag and Adding a New Tag
`swap-swap`	Gigabit Ethernet IQ interfaces	Rewriting the Inner and Outer VLAN Tags
`t1-time time`	Ethernet interfaces configured for DLSw	Configuring LLC2 Options
`t2-time time`	Ethernet interfaces configured for DLSw	Configuring LLC2 Options
`tag-protocol-id tpid`	Gigabit Ethernet IQ and Gigabit Ethernet PICs with SFPs (except the 10-port Gigabit Ethernet PIC, Aggregated Ethernet with Gigabit Ethernet IQ interfaces, and the built-in Gigabit Ethernet port on the M7i platform)	Rewriting the VLAN Tag
`transmit-weight number`	ATM2 IQ interfaces	Configuring the ATM2 IQ Transmission Weight
`trej-time time`	Ethernet interfaces configured for DLSw	Configuring LLC2 Options
`(traps \| no-traps)`	All	Enabling or Disabling SNMP Notifications on Logical Interfaces
`trunk-bandwidth rate`	ATM2 IQ interfaces	Configuring Layer 2 Circuit Trunk Mode Scheduling
`trunk-id number`	ATM2 IQ interfaces	Configuring Layer 2 Circuit Transport Mode
`ttl number`	GRE tunnel and IP tunnel interfaces	JUNOS Services Interfaces Configuration Guide
`tunnel`	Encryption, GRE tunnel, and IP tunnel interfaces	JUNOS Services Interfaces Configuration Guide
`underlying-interface`	IP demux interfaces	Specifying the Demux Underlying Interface
`vbr peak rate sustained rate burst length`	ATM interfaces	Defining the ATM Traffic-Shaping Profile
`vci vpi-identifiervci-identifier`	ATM1 and ATM2 IQ point-to-point interfaces	Configuring a Point-to-Point ATM1 or ATM2 IQ Connection
`vci-range`	ATM2 IQ interfaces	Configuring ATM-to-Ethernet Interworking
`vpi vpi-identifier`	ATM1 and ATM2 IQ point-to-point interfaces	Configuring a Point-to-Point ATM1 or ATM2 IQ Connection
`vlan-id number`	Fast Ethernet, Gigabit Ethernet interfaces, and Gigabit Ethernet IQ interfaces and aggregated Ethernet using Gigabit Ethernet IQ interfaces	Binding a VLAN ID to a Logical Interface and Rewriting the VLAN Tag
`vlan-tags inner tpidvlan-id outer tpidvlan-id`	Gigabit Ethernet IQ interfaces	Configuring Dual VLAN Tags
`watch-list`	ISDN interfaces	Configuring Dialer Watch

[Contents] [Prev] [Next] [Index] [Report an Error]