[Contents] [Prev] [Next] [Index] [Report an Error]

inner-tag-protocol-id

Syntax



inner-tag-protocol-id tpid;

Hierarchy Level



[edit interfaces interface-name unit logical-unit-number input-vlan-map],
[edit interfaces interface-name unit logical-unit-number output-vlan-map],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number input-vlan-map],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number output-vlan-map]

Release Information

Statement introduced in JUNOS Release 8.1.

Description

For Gigabit Ethernet IQ and IQ2 interfaces, and for aggregated Ethernet interfaces using Gigabit Ethernet IQ2 or 10-Gigabit Ethernet PICs on MX-series routing platforms, configure the IEEE 802.1Q TPID value to rewrite for the inner tag. All TPIDs you include in input and output VLAN maps must be among those you specify at the [edit interfaces interface-name gigether-options ethernet-switch-profile tag-protocol-id [ tpids ]] hierarchy level.

Default

If the inner-tag-protocol-id statement is not configured, the TPID value is 0x8100.

Usage Guidelines

See Configuring Inner and Outer TPIDs and VLAN IDs.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

[Contents] [Prev] [Next] [Index] [Report an Error]