[Contents] [Prev] [Next] [Index] [Report an Error]

Example: Configuring Gigabit Ethernet Interfaces

The following configuration is sufficient to get a Gigabit Ethernet, Tri-Rate Ethernet copper, or 10-Gigabit Ethernet interface up and running. By default, IPv4 Gigabit Ethernet interfaces on MX-series, M-series, and T-series routing platforms use 802.3 encapsulation. J-series Gigabit Ethernet interfaces do not support 802.3 encapsulation.



[edit]
user@host# set interfaces ge-2/0/1 unit 0
family inet address local-address

user@host# show

interfaces {


ge-2/0/1 {


unit 0 {


family inet {
address local-address;
}


}


}


}

The M160, M320, M120, T320, and T640 2-port Gigabit Ethernet PIC supports two independent Gigabit Ethernet links.

Each of the two interfaces on the PIC is named:



ge-fpc/pic/[0.1]

Each of these interfaces has functionality identical to the Gigabit Ethernet interface supported on the single-port PIC.

[Contents] [Prev] [Next] [Index] [Report an Error]