[Contents] [Prev] [Next] [Index] [Report an Error]

Example: Configuring APS Load Sharing Between Circuit Pairs

Configure APS load sharing to match the configuration shown in Figure 56:

On Router A



[edit interfaces so-7/0/0 sonet-options aps]
user@host# set working-circuit start

[edit interfaces so-7/0/0 sonet-options aps]
user@host# set authentication-key linsey

[edit interfaces so-7/0/0 sonet-options aps]
user@host# set paired-group "Router A-Router
B"

...
[edit interfaces so-0/0/0 sonet-options aps]
user@host# set protect-circuit up

[edit interfaces so-0/0/0 sonet-options aps]
user@host# set authentication-key woolsey

[edit interfaces so-0/0/0 sonet-options aps]
user@host# set paired-group "Router A-Router
B"

On Router B



[edit interfaces so-1/0/0 sonet-options aps]
user@host# set working-circuit up

[edit interfaces so-1/0/0 sonet-options aps]
user@host# set authentication-key woolsey

[edit interfaces so-1/0/0 sonet-options aps]
user@host# set paired-group "Router A-Router
B"

...
[edit interfaces so-6/0/0 sonet-options aps]
user@host# set protect-circuit start

[edit interfaces so-6/0/0 sonet-options aps]
user@host# set authentication-key linsey

[edit interfaces so-6/0/0 sonet-options aps]
user@host# set paired-group "Router A-Router
B"

[Contents] [Prev] [Next] [Index] [Report an Error]