[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring the OAM PDU Interval

Periodic OAM PDUs are sent to perform link monitoring.

You can specify the periodic OAM PDU sending interval for fault detection.

To configure the sending interval, include the pdu-interval statement at the [edit protocol oam ethernet link-fault-management interface interface-name] hierarchy level:



[edit protocol oam ethernet link-fault-management interface interface-name]

pdu-interval interval;

The periodic OAM PDU interval range is from 100 through 1000 milliseconds. The default sending interval is 1000 milliseconds.

[Contents] [Prev] [Next] [Index] [Report an Error]