[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring the Frame Relay Encapsulation on a Logical Interface

Generally, you configure an interface’s encapsulation at the [edit interfaces interface-name] hierarchy level. However, for Frame Relay encapsulation, you can also configure the encapsulation type that is used inside the Frame Relay packet itself. To do this, include the encapsulation statement, specifying the frame-relay-ccc, frame-relay-ppp, frame-relay-tcc, frame-relay-ether-type, or frame-relay-ether-type-tcc option:




encapsulation (frame-relay-ccc | frame-relay-ppp
| frame-relay-tcc | frame-relay-ether-type | frame-relay-ether-type-tcc);

You can include this statement at the following hierarchy levels:

[edit interfaces interface-name unit logical-unit-number]
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number]

[Contents] [Prev] [Next] [Index] [Report an Error]