 |
Note: For the continuity check message interval to be configured for 10 milliseconds, the delegate-processing statement must also be included at the [edit routing-options ppm] hierarchy level. |
You can specify the continuity check message (CCMs) interval. The interval is the time between the transmission of CCMs. You can specify 10 minutes (10m), 1 minute (1m), 10 seconds (10s), 1 second (1s), 100 milliseconds (100ms), or 10 milliseconds (10ms). The default value is 1 minute.
|
Note: For the continuity check message interval to be configured for 10 milliseconds, the delegate-processing statement must also be included at the [edit routing-options ppm] hierarchy level. |
To configure the interval, include the interval statement at the [edit protocols oam ethernet connectivity-fault-management maintenance-domain domain-name maintenance-association ma-name continuity-check] hierarchy level.
 | Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |