Configuring the ATM-to-Ethernet Interworking Physical Interface VPI

Configure the ATM physical interface VPI by including the vpi statement at the [edit interfaces interface-name atm-options] hierarchy level:



[edit interfaces interface-name atm-options]

vpi virtual-path-identifier;

VPI 0 is reserved, and must not be used.

ATM F4/F5 OAM is not supported for VPIs used in ATM-to-Ethernet interworking cross-connects. Any F4/F5 OAM cells received are discarded.

Only one logical interface may be declared per virtual path specified in the atm-options statement hierarchy.

It is not necessary to dedicate all the VPIs of an ATM2 interface for ATM-to-Ethernet interworking cross-connects.