[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring the ATM-to-Ethernet Interworking Inner VLAN Identifier Range

Configure the Ethernet logical interface inner VLAN ID range by including the inner-vlan-id-range statement and specifying the starting VLAN ID and ending VLAN ID at the [edit interfaces interface-name unit logical-unit-number] hierarchy level:



[edit interfaces interface-name unit logical-unit-number]
inner-vlan-id-range start start-id end end-id;

VLAN IDs 0 and 4095 are reserved by IEEE 801.1q and must not be used for the inner or outer VLAN ID.

VCIs 0 through 31 are reserved for ATM management purposes by convention. Therefore inner VLAN IDs 1 through 31 should not be used.

VLAN ID 1 might be used by Ethernet switches for certain bridge management services, so using VLAN ID 1 for the inner or outer VLAN ID is discouraged.

[Contents] [Prev] [Next] [Index] [Report an Error]