[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring T3 IQ Interfaces

To configure a T3 interface on an OC3 PIC, include the partition, oc-slice, and interface-type statements at the [edit interfaces coc3-fpc/pic/port] hierarchy level, specifying the coc1 interface type:



[edit interfaces coc3-fpc/pic/port]

partition partition-number oc-slice oc-slice-range interface-type coc1;

When you include the partition statement at the [edit interfaces coc3-fpc/pic/port] hierarchy level, the only configurable interface type is coc1. This configuration creates interface coc1-fpc/pic/port:channel.

Note: Class-of-service (CoS) rules cannot be applied to an individual channel configured on channelized IQ interfaces. You can only apply CoS rules to the aggregate bit streams.

Then, include the no-partition interface-type statement at the [edit interfaces coc1-fpc/pic/port:channel] hierarchy level, specifying the t3 interface type:



[edit interfaces coc1-fpc/pic/port:channel]

no-partition interface-type t3;

This configuration creates interface t3-fpc/pic/port:channel.

Example: Configuring T3 IQ Interfaces

Configure a T3 interface using partition 3 and OC slice 3. This configuration creates interface t3-1/1/0:3.



[edit interfaces coc3-1/1/0]
partition 3 oc-slice 3 interface-type coc1;
[edit interfaces coc1-1/1/0:3]
no-partition interface-type t3;

For a full configuration example, see the JUNOS Feature Guide.

[Contents] [Prev] [Next] [Index] [Report an Error]