 | Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |
You can configure threshold values for fault events that trigger the sending of link event TLVs when the values exceed the threshold. To set threshold values for fault events on an interface, include the event-thresholds statement at the [edit protocols oam ethernet link-fault-management interface] hierarchy level.
You can also configure OAM threshold values within an action profile and apply the action profile to multiple interfaces. To create an action profile, include the action-profile statement at the [edit protocols oam ethernet link-fault-management] hierarchy level.
To view OAM statistics, use the show oam ethernet link-fault-management operational mode command. To clear OAM statistics, use the clear oam ethernet link-fault-management statistics operational mode command. To clear link-fault management state information and restart the link discovery process on Ethernet interfaces, use the operational clear oam ethernet link-fault-management state mode command. For more information about these commands, see the JUNOS Interfaces Command Reference.
| Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |