 | Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |
When you are using Frame Relay encapsulation on an interface, each logical interface corresponds to one or more permanent virtual circuits (PVCs) or switched virtual circuits (SVCs). For each PVC or SVC, you must configure one data-link connection identifier (DLCI).
A Frame Relay interface can be a point-to-point interface or a point-to-multipoint (also called a multipoint nonbroadcast multiaccess [NBMA]) connection.
To configure Frame Relay DLCIs, you can do the following:
| Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |