 | Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |
You can define a bandwidth threshold for network traffic on the Services Router using the dialer interface and ISDN interfaces. Initially, only one ISDN link is active and all packets are sent through this interface. When a predefined bandwidth threshold is reached on this interface, the dialer interface activates another ISDN link and initiates a data connection.
To configure bandwidth on demand, perform the steps in the following sections to configure the dialer interface and the physical ISDN interfaces:
| Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |