[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring APS Timers

The protect and working routers periodically send packets to their neighbors to advertise that they are operational. By default, these advertisement packets are sent every 1000 milliseconds. A routing platform considers its neighbor to be operational for a period, called the hold time, that is, by default, three times the advertisement interval. If the protect router does not receive an advertisement packet from the working router within the hold time configured on the protect router, the protect router assumes that the working router has failed and becomes active.

APS is symmetric; either side of a circuit can time out the other side (for example, when detecting a crash of the other). Under normal circumstances, the failure of the protect router does not cause any changes because the traffic is already moving on the working router. However, if you had configured request protect and the protect router failed, the working router would enable its interface.

To modify the advertisement interval, include the advertise-interval at the [edit interfaces interface-name sonet-options aps] hierarchy level:



[edit interfaces so-fpc/pic/port sonet-options aps]

advertise-interval milliseconds;

To modify the hold time, include the hold-time at the [edit interfaces interface-name sonet-options aps] hierarchy level:



[edit interfaces so-fpc/pic/port sonet-options aps]

hold-time milliseconds;

The advertisement intervals and hold times on the protect and working routers can be different.

[Contents] [Prev] [Next] [Index] [Report an Error]