[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring an STM1 IQ or STM1 IQE Interface

On a one-port Channelized STM1 IQ PIC, or each individual ports of the 4-port Channelized STM1 IQE PIC, you can configure one SDH STM1 interface. To configure an SDH STM1 interface, include the no-partition interface-type statement at the [edit interfaces cstm1-fpc/pic/port] hierarchy level, specifying the so interface type:



[edit interfaces cstm1-fpc/pic/port]

no-partition interface-type so;

This configuration creates interface so-fpc/pic/port.

Note: Class-of-service (CoS) rules cannot be applied to an individual channel configured on channelized IQ and IQE interfaces. You can only apply CoS rules to the aggregate bit streams.

[Contents] [Prev] [Next] [Index] [Report an Error]