|
jnxL2tpTunnelStatsLocalTID
|
jnxL2tpTunnelStatsEntry 1
|
The local tunnel Identifier.
|
|
jnxL2tpTunnelStatsServiceInterfac
|
jnxL2tpTunnelStatsEntry 2
|
The name of the service interface on which the tunnel
is being hosted.
|
|
jnxL2tpTunnelStatsTunnelGroup
|
jnxL2tpTunnelStatsEntry 3
|
The name of the tunnel group to which the tunnel belongs.
|
|
jnxL2tpTunnelStatsRemoteTID
|
jnxL2tpTunnelStatsEntry 4
|
The remote tunnel identifier. See RFC 2661, Section 3.1.
|
|
jnxL2tpTunnelStatsRemoteIpAddrType
|
jnxL2tpTunnelStatsEntry 5
|
The type of the remote-end address of the tunnel.
|
|
jnxL2tpTunnelStatsRemoteIpAddress
|
jnxL2tpTunnelStatsEntry 6
|
The remote-end address of the tunnel.
|
|
jnxL2tpTunnelStatsRemoteUdpPort
|
jnxL2tpTunnelStatsEntry 7
|
The remote-end UDP port of the tunnel.
|
|
jnxL2tpTunnelStatsActiveSessions
|
jnxL2tpTunnelStatsEntry 8
|
The total number of sessions that are in established
state for the tunnel.
|
|
jnxL2tpTunnelStatsStat
|
jnxL2tpTunnelStatsEntry 9
|
One of the following states for the control
tunnel:
-
cc_responder_accept_new—shows that the
tunnel has received and accepted the start control connection request
(SCCRQ).
-
cc_responder_reject_new—shows that the
tunnel has received and rejected the SCCRQ.
-
cc_responder_idle—shows that the tunnel
has just been created.
-
cc_responder_wait_ctl_conn—shows that the
tunnel has sent the start control connection response (SCCRP) and
is waiting for the start control connection connected (SCCCN) message.
-
Cleanup—shows that the tunnel is being
cleaned up.
-
Closed—shows that the tunnel is being
closed.
-
Destroyed—shows that the tunnel is being
destroyed.
-
Established—shows that the tunnel is operational.
-
Terminate—shows that the tunnel is being
terminated.
-
Unknown—shows that the tunnel is not connected
to the router.
|
|
jnxL2tpTunnelStatsLocalIpAddrType
|
jnxL2tpTunnelStatsEntry 10
|
The type of local-end address of the tunnel.
|
|
jnxL2tpTunnelStatsLocalIpAddress
|
jnxL2tpTunnelStatsEntry 11
|
The local-end address of the tunnel.
|
|
jnxL2tpTunnelStatsLocalUdpPort
|
jnxL2tpTunnelStatsEntry 12
|
The local-end UDP port number of the tunnel.
|
|
jnxL2tpTunnelStatsLocalHostName
|
jnxL2tpTunnelStatsEntry 13
|
The local host name of the tunnel.
|
|
jnxL2tpTunnelStatsRemoteHostName
|
jnxL2tpTunnelStatsEntry 14
|
The host name of the L2TP peer, as discovered during
the tunnel establishment phase (via the Host Name AVP). If the tunnel
is idle, this object shows the value based on the data from the last
time it was connected.
|
|
jnxL2tpTunnelMaxSessions
|
jnxL2tpTunnelStatsEntry 15
|
The maximum number of sessions configured on the tunnel.
Value could be a positive number or zero (unlimited).
|
|
jnxL2tpTunnelStatsWindowSize
|
jnxL2tpTunnelStatsEntry 16
|
The send window size for the tunnel.
|
|
jnxL2tpTunnelStatsHelloInterval
|
jnxL2tpTunnelStatsEntry 17
|
The hello interval for the tunnel.
|
|
jnxL2tpTunnelStatsCreationTime
|
jnxL2tpTunnelStatsEntry 18
|
The time when the tunnel was creaed.
|
|
jnxL2tpTunnelStatsUpTime
|
jnxL2tpTunnelStatsEntry 19
|
The time elapsed since the tunnel was established.
|
|
jnxL2tpTunnelStatsIdleTime
|
jnxL2tpTunnelStatsEntry 20
|
The time elapsed since the last data activity, transmission
or reception, on the tunnel.
|
|
jnxL2tpTunnelStatsCollectionStart
|
jnxL2tpTunnelStatsEntry 21
|
The time at which the statistics gathering started for
the tunnel.
|
|
jnxL2tpTunnelStatsControlTxPkts
|
jnxL2tpTunnelStatsEntry 22
|
The number of control packets transmitted to the tunnel
peer.
|
|
jnxL2tpTunnelStatsControlTxBytes
|
jnxL2tpTunnelStatsEntry 23
|
The number of control bytes transmitted to the tunnel
peer.
|
|
jnxL2tpTunnelStatsControlRxPkts
|
jnxL2tpTunnelStatsEntry 24
|
The number of control packets received on the tunnel.
|
|
jnxL2tpTunnelStatsControlRxByte
|
jnxL2tpTunnelStatsEntry 25
|
The number of control bytes received from the tunnel
peer.
|
|
jnxL2tpTunnelStatsDataTxPkts
|
jnxL2tpTunnelStatsEntry 26
|
The number of data packets transmitted to the tunnel.
|
|
jnxL2tpTunnelStatsDataTxBytes
|
jnxL2tpTunnelStatsEntry 27
|
The number of data bytes transmitted to the tunnel peer.
|
|
JnxL2tpTunnelStatsDataRxPkts
|
jnxL2tpTunnelStatsEntry 28
|
The number of data packets received from the tunnel.
|
|
jnxL2tpTunnelStatsDataRxBytes
|
jnxL2tpTunnelStatsEntry 29
|
The number of data bytes received from the tunnel peer.
|
|
jnxL2tpTunnelStatsErrorTxPkts
|
jnxL2tpTunnelStatsEntry 30
|
The number of error transmits packets on the tunnel.
|
|
jnxL2tpTunnelStatsErrorRxPkts
|
jnxL2tpTunnelStatsEntry 31
|
The number of error receive packets on the tunnel.
|
