Analyzer Output Table

[Contents] [Prev] [Next] [Index] [Report an Error]

The jnxAnalyzerOutputTable, whose object identifier is {jnxAnalyzerMIBObjects 3}, contains information about destination port to which the packets are mirrored. Each jnxAnalyzerOutputEntry contains the objects listed in Table 210, and provides information about destination port or destination VLAN.

Table 210: jnxAnalyzerOutputTable

Object	Object ID	Description
jnxAnalyzerOutputValue	jnxAnalyzerOutputEntry 1	Uniquely identifies a destination port or VLAN. This object can contain a string of not more than 255 characters. If the value of jnxAnalyzerOutputType is 1, then jnxAnalyzerOutputValue contains an interface name. If the value of jnxAnalyzerOutputType is 1, then jnxAnalyzerOutputValue contains a VLAN name.
jnxAnalyzerOutputType	jnxAnalyzerOutputEntry 2	Denotes the type of the output destination port. This object uses integer values 1 (for destination port that is on the same switch) and 2 (for remote analyzer, that is a dedicated VLAN on a different switch).

Object

Object ID

Description

jnxAnalyzerOutputValue

jnxAnalyzerOutputEntry 1

Uniquely identifies a destination port or VLAN. This object can contain a string of not more than 255 characters.

If the value of jnxAnalyzerOutputType is 1, then jnxAnalyzerOutputValue contains an interface name.

If the value of jnxAnalyzerOutputType is 1, then jnxAnalyzerOutputValue contains a VLAN name.

jnxAnalyzerOutputType

jnxAnalyzerOutputEntry 2

Denotes the type of the output destination port. This object uses integer values 1 (for destination port that is on the same switch) and 2 (for remote analyzer, that is a dedicated VLAN on a different switch).

[Contents] [Prev] [Next] [Index] [Report an Error]