[Contents] [Prev] [Next] [Index] [Report an Error]

interface

See the following sections:

interface (Routing Options)

Syntax

interface interface-names {
reverse-oif-mapping;
subscriber-leave-timer seconds;
}

Hierarchy Level

[edit logical-systems logical-system-name routing-instances routing-instance-name routing-options multicast],
[edit logical-systems logical-system-name routing-options multicast],
[edit routing-instances routing-instance-name routing-options multicast],
[edit routing-options multicast]

Release Information

Statement introduced in JUNOS Release 8.3.

Description

Configure the set of interfaces for multicast on which you plan to manage the maximum bandwidth.

Options

interface-names—Names of the physical or logical interfaces. For details about specifying interfaces, see the JUNOS Network Interfaces Configuration Guide.

The remaining statement is explained separately.

Usage Guidelines

See Defining Interface Bandwidth Maximums.

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.

interface (Scoping)

Syntax

interface [ interface-names ];

Hierarchy Level

[edit logical-systems logical-system-name routing-instances routing-instance-name routing-options multicast scope scope-name],
[edit logical-systems logical-system-name routing-options multicast scope scope-name],
[edit routing-instances routing-instance-name routing-options multicast scope scope-name],
[edit routing-options multicast scope scope-name]

Release Information

Statement introduced before JUNOS Release 7.4.

Description

Configure the set of interfaces for multicast scoping.

Options

interface-names—Names of the interfaces to scope. Specify the full interface name, including the physical and logical address components. To configure all interfaces, you can specify all. For details about specifying interfaces, see the JUNOS Network Interfaces Configuration Guide.

Usage Guidelines

See Configuring Multicast Scoping with the scope Statement.

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.

[Contents] [Prev] [Next] [Index] [Report an Error]

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.