[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring the Data MDT Limit

The PE router implementing a data MDT for a local multicast source must establish a limit for the number of data MDTs created in this VRF instance. If the limit is 0 (the default), then no data MDTs are created for this VRF instance.

To configure the data MDT limit, include the tunnel-limit statement:




tunnel-limit limit;

You can include this statement at the following hierarchy levels:

[edit logical-systems logical-system-name routing-instances routing-instance-name protocols pim mdt]
[edit routing-instances routing-instance-name protocols pim mdt]

The valid range is from 0 through 1024 for a VRF instance. There is a limit of 8000 tunnels for all data MDTs in all VRF instances on a PE router.

[Contents] [Prev] [Next] [Index] [Report an Error]