[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring the Data MDT Group Range

The provider edge (PE) router implementing data MDTs for a local multicast source must establish the group range to use for data MDTs created in this VRF instance. This address range cannot overlap with any of the default MDT addresses for all VPNs on the router. If you configure overlapping group ranges, the configuration commit operation fails.

To configure the data MDT group range, include the group-range statement:




group-range multicast-prefix;

You can include this statement at the following hierarchy levels:

[edit logical-systems logical-system-name routing-instances routing-instance-name protocols pim mdt]
[edit routing-instances routing-instance-name protocols pim mdt]

Any multicast address range can be used as the multicast prefix, for example, 227.0.0.0/8.

[Contents] [Prev] [Next] [Index] [Report an Error]