path



path path-name { 
<address | hostname> <strict | loose> 
}



[edit logical-systems logical-system-name protocols mpls],
[edit protocols mpls]

Statement introduced before JUNOS Release 7.4.

Create a named path and optionally specify the sequence of explicit routers that form the path.

You must include this statement when configuring explicit LSPs.

address—(Optional) IP address of each transit router in the LSP. You must specify the address or hostname of each transit router, although you do not need to list each transit router if its type is loose. As an option, you can include the ingress and egress routers in the path. Specify the addresses in order, starting with the ingress router (optional) or the first transit router, and continuing sequentially along the path until reaching the egress router (optional) or the router immediately before the egress router.
hostname—(Optional) See address.
loose—(Optional) Indicate that the next address in the path statement is a loose link. This means that the LSP can traverse through other routers before reaching this router.
path-name—Name that identifies the sequence of nodes that form an LSP. The name can contain up to 32 characters and can include letters, digits, periods, and hyphens. To include other characters or use a longer name, enclose the name in quotation marks. The name must be unique within the ingress router.
strict—(Optional) Indicate that the LSP must go to the next address specified in the path statement without traversing other nodes. This is the default.

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.