[Contents] [Prev] [Next] [Index] [Report an Error]

p2mp-receive-switch

Syntax



p2mp-receive-switch point-to-multipoint-switch-name { 
output-interface [ interface-name.unit-number ];
receive-p2mp-lsp receiving-point-to-multipoint-lsp;
}

Hierarchy Level



[edit logical-systems logical-system-name protocols connections],
[edit protocols connections]

Release Information

Statement introduced before JUNOS Release 7.4.

Description

Configure the CCC switch for a point-to-multipoint LSP on the egress PE router.

Options

point-to-multipoint-switch-name—Point-to-multipoint CCC receive switch name.
output-interface interface-name.unit-number—Name of the egress interfaces for the point-to-multipoint LSP traffic. You can configure multiple output interfaces.
receive-p2mp-lsp receiving-point-to-multipoint-lsp—Name of the point-to-multipoint LSP that is switched to the output interface.

Usage Guidelines

See Configuring the Point-to-Multipoint LSP Switch on the Egress PE Router.

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.

[Contents] [Prev] [Next] [Index] [Report an Error]