[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring the Primary Point-to-Multipoint LSP

To configure point-to-multipoint LSPs, you begin by configuring the primary point-to-multipoint LSP, which carries traffic from the ingress router. The configuration of the primary point-to-multipoint LSP is similar to a signaled LSP. See Configuring the Ingress Router for Signaled LSPs for more information. In addition to the conventional LSP configuration, you need to specify a path name for the primary point-to-multipoint LSP by including the p2mp statement:




p2mp p2mp-lsp-name;

You can include this statement at the following hierarchy levels:

[edit protocols mpls label-switched-path lsp-name]
[edit logical-systems logical-system-name protocols mpls label-switched-path lsp-name]

You can enable the optimization timer for point-to-multipoint LSPs. See Optimizing Signaled LSPs for more information.

[Contents] [Prev] [Next] [Index] [Report an Error]