[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring the GPID

You need to specify the type of payload carried by the LSP. The payload is the type of packet underneath the MPLS label. The payload is specified by the generalized payload identifier (GPID).

You can specify the GPID with any of the following values:

hdlc—High-Level Data Link Control (HDLC)
ethernet—Ethernet
ipv4—Internet Protocol version 4 (default)
pos-scrambling-crc-16—For interoperability with other vendors’ equipment
pos-no-scrambling-crc-16—For interoperability with other vendors’ equipment
pos-scrambling-crc-32—For interoperability with other vendors’ equipment
pos-no-scrambling-crc-32—For interoperability with other vendors’ equipment
ppp—Point-to-Point Protocol (PPP)

To configure the GPID, include the gpid statement at the [edit protocols mpls label-switched-path lsp-name lsp-attributes] hierarchy level:



[edit protocols mpls label-switched-path lsp-name lsp-attributes]

gpid gpid;

[Contents] [Prev] [Next] [Index] [Report an Error]