After you have configured the LMP peers, add the peer interfaces to RSVP and OSPF. The peer interface name must match the peer name configured in LMP. Once the peer interfaces are added to the protocols, the traffic engineering link local and remote addresses can be signaled and advertised to peers like any other interface enabled for RSVP and OSPF. These addresses act as virtual interfaces for GMPLS.
 |
Note: When adding the virtual peer interfaces to RSVP and OSPF, do not configure the corresponding physical control channel interface in either protocol. If you include the interface all statement, you must disable the RSVP and OSPF protocols manually on the control channel interface. |
To configure peer interfaces in RSVP and OSPF, complete the procedures in the following sections:
 | Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |