[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
bandwidth
Syntax
- bandwidth (1g | 10g);
Hierarchy Level
- [edit chassis fpc slot-number pic number tunnel-services]
Release Information
Statement introduced in JUNOS
Release 8.2.
Description
On the MX-series Ethernet Services
routers only, specify the amount of bandwidth to reserve for tunnel
services.
Options
-
1g—Specify a bandwidth of 1 Gbps
on the Packet Forwarding Engine connected to a Gigabit Ethernet 40-port
Dense Port Concentrator (DPC).
-
10g—Specify a bandwidth of 10 Gbps on the Packet
Forwarding Engine connected to 10-Gigabit Ethernet 4-port DPC.
 |
Note:
If you specify a bandwidth that is not compatible
with the type of DPC and Packet Forwarding Engine, tunnel services
are not activated. For example, you cannot specify a bandwidth of
1 GPS for a Packet Forwarding Engine on a 10-Gigabit Ethernet 4-port
DPC.
|
Usage Guidelines
See Configuring Layer 3 Tunnel Services Interfaces on MX-series
Routers.
Required Privilege Level
interface—To view this statement
in the configuration.
interface-control—To add this statement to
the configuration.
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
