[Contents] [Prev] [Next] [Index] [Report an Error]

Verifying CCC and TCC Graceful Restart

To view graceful restart information for CCC and TCC connections, use the show connections command. The following example assumes four remote interface CCC connections between CE1 and CE2:

user@PE1> show connections

CCC and TCC connections [Link Monitoring On]
  Legend for status (St)              Legend for connection types
  UN -- uninitialized                 if-sw:  interface switching
  NP -- not present                   rmt-if: remote interface switching
  WE -- wrong encapsulation           lsp-sw: LSP switching
  DS -- disabled
  Dn -- down                          Legend for circuit types
  -> -- only outbound conn is up      intf -- interface
  <- -- only inbound  conn is up      tlsp -- transmit LSP
  Up -- operational                   rlsp -- receive LSP
  RmtDn -- remote CCC down
  Restart -- restarting

CCC Graceful restart : Restarting

Connection/Circuit                Type    St      Time last up     # Up trans
CE1-CE2-0                         rmt-if  Restart -----                     0
  fe-1/1/0.0                        intf  Up
  PE1-PE2-0                         tlsp  Up
  PE2-PE1-0                         rlsp  Up
CE1-CE2-1                         rmt-if  Restart -----                     0
  fe-1/1/0.1                        intf  Up
  PE1-PE2-1                         tlsp  Up
  PE2-PE1-1                         rlsp  Up
CE1-CE2-2                         rmt-if  Restart -----                     0
  fe-1/1/0.2                        intf  Up
  PE1-PE2-2                         tlsp  Up
  PE2-PE1-2                         rlsp  Up
CE1-CE2-3                         rmt-if  Restart -----                     0
  fe-1/1/0.3                        intf  Up
  PE1-PE2-3                         tlsp  Up
  PE2-PE1-3                         rlsp  Up

[Contents] [Prev] [Next] [Index] [Report an Error]