restart

Syntax

Syntax (Routing Matrix)

Syntax (J-series Routing Platform)

Release Information

Command introduced before JUNOS Release 7.4.

dynamic-flow-capture option added in JUNOS Release 7.4.

dlsw option added in JUNOS Release 7.5.

event-processing option added in JUNOS Release 7.5.

link-management option added in Release 8.0.

ppp option added in JUNOS Release 7.5.

l2ald option added in JUNOS Release 8.0.

pgcp-service option added in JUNOS Release 8.4.

Description

Restart a JUNOS software process.

Caution: Never restart a software process unless instructed to do so by a customer support engineer. A restart might cause the router to drop calls and interrupt transmission, resulting in possible loss of data.

Options

none — Same as gracefully.

adaptive-services — (Optional) Restart the configuration management process that manages the configuration for stateful firewall, Network Address Translation (NAT), intrusion detection services (IDS), and IP Security (IPSec) services on the Adaptive Services PIC.

audit-process — (Optional) Restart the RADIUS accounting process.

chassis-control — (Optional) Restart the chassis management process.

class-of-service — (Optional) Restart the class-of-service (CoS) process, which controls the router's CoS configuration.

dhcp — (J-series routing platform only) (Optional) Restart the software process for a Dynamic Host Configuration Protocol (DHCP) server. A DHCP server allocates network IP addresses and delivers configuration settings to client hosts without user intervention.

dialer-services — (Optional) Restart the Integrated Services Digital Network (ISDN) dial out process.

disk-monitoring — (Optional) Restart disk monitoring, which checks the health of the hard disk drive on the Routing Engine.

dlsw — (J-series routing platform only) (Optional) Restart the data link switching (DLSw) service.

dynamic-flow-capture — (Optional) Restart the dynamic flow capture (DFC) process, which controls DFC configurations on Monitoring Services III PICs.

ecc-error-logging — (Optional) Restart the error checking and correcting (ECC) process, which logs ECC parity errors in memory on the Routing Engine.

event-processing — (Optional) Restart the event process (eventd).

firewall — (Optional) Restart the firewall management process, which manages firewall configuration.

interface-control — (Optional) Restart the interface process, which controls the router's physical interface devices and logical interfaces.

ipsec-key-management — (Optional) Restart the IPSEC key management process.

isdn-signaling — (Optional) Restart the ISDN signaling process, which initiates ISDN connections.

kernel-replication — (Optional) Restart the kernel replication process, which replicates the state of the backup Routing Engine when graceful Routing Engine switchover is configured.

l2-learning — (Optional) Restart the Layer 2 address flooding and learning process.

l2tp-service — (Optional) (M10, M10i, and M7i routers only) Restart the Layer 2 Tunneling Protocol (L2TP) process, which establishes L2TP tunnels and Point-to-Point Protocol (PPP) sessions through L2TP tunnels.

lacp — (Optional) Restart the link aggregation control protocol process.

link-management — (Optional) Restart the Link Management Protocol (LMP) process, which establishes and maintains LMP control channels.

mib-process — (Optional) Restart the Management Information Base (MIB) II process, which provides the router's MIB II agent.

network-access-service — (Optional) Restart the network access process, which provides the router's Challenge Handshake Authentication Protocol (CHAP) authentication service.

pgcp-service — (Optional) Restart the packet gateway service process.

pgm — (Optional) Restart the process that implements the Pragmatic General Multicast (PGM) protocol for assisting in the reliable delivery of multicast packets.

pic-services-logging — (Optional) Restart the logging process for some Physical Interface Cards (PICs). With this process, also known as fsad (the file system access daemon), PICs send special logging information to the Routing Engine for archiving on the hard disk.

ppp — (Optional) Restart the Point-to-Point Protocol (PPP) process.

pppoe — (Optional) Restart the Point-to-Point Protocol over Ethernet (PPPoE) process.

redundancy-interface-process — (Optional) Restart the ASP redundancy process.

remote-operations — (Optional) Restart the remote operations process, which provides the ping and traceroute MIBs.

routing <logical-system logical-system-name> — (Optional) Restart the routing protocol process, which controls the routing protocols that run on the router and maintains the routing tables. Optionally, restart the routing protocol process for the specified logical system only.

sampling — (Optional) Restart the sampling process, which performs packet sampling and cflowd export.

service-development — (Optional) Restart the service deployment service process.

snmp — (Optional) Restart the SNMP process, which provides the router's SNMP master agent.

usb-control — (J-series routing platform only) (Optional) Restart the USB control process.

web-management — (J-series routing platform only) (Optional) Restart the Web management process.

all — (Routing matrix only) (Optional) Restart the software process on all chassis.

all-lcc — (Routing matrix only) (Optional) Restart the software process on all T640 routing nodes connected to a TX Matrix platform.

lcc number — (Routing matrix only) (Optional) Restart the software process for a specific T640 routing node that is connected to a TX Matrix platform. Replace number with a value from 0 through 3.

gracefully — (Optional) Restart the software process.

immediately — (Optional) Immediately restart the software process.

soft — (Optional) Reread and reactivate the configuration without completely restarting the software processes. For example, Border Gateway Protocol (BGP) peers stay up and the routing table stays constant. Omitting this option results in a graceful restart of the software process.

Required Privilege Level

reset

List of Sample Output

Output Fields

When you enter this command, you are provided feedback on the status of your request.

interfaces process terminated
interfaces process restarted

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.