- show multicast snooping statistics
- <instance instance-name>
- <interface interface-name>
- <logical-system (all | logical-system-name)>
Command introduced in JUNOS Release 8.5.
Display IP multicast snooping statistics.
none — Display multicast snooping statistics for all supported address families for all routing instances on all logical systems.
instance instance-name — (Optional) Display statistics for a specific routing instance.
interface interface-name — (Optional) Display statistics for a specific interface.
logical-system (all | logical-system-name) — (Optional) Perform this operation on all logical systems or on a particular logical system.
The input and output interface multicast snooping statistics are consistent, but not timely. They are constructed from the forwarding statistics, which are gathered at 30-second intervals. Therefore, the output from this command always lags the true count by up to 30 seconds.
view
clear multicast snooping statistics
Table 46 describes the output fields for the show multicast snooping statistics command. Output fields are listed in the approximate order in which they appear.
Table 46: show multicast snooping statistics Output Fields
user@host> show multicast snooping statistics
Routing-instance: foo
Family: INET
Interface: fe-0/0/2.200
Routing protocol: PIM Mismatch error: 0
Mismatch: 0 Mismatch no route: 0
Kernel resolve: 22 Routing notify: 0
Resolve no route: 0 Resolve error: 0
Resolve filtered: 0 Notify filtered: 0
In kbytes: 0 In packets: 0
Out kbytes: 0 Out packets: 0
Routing-instance: bar
Family: INET
Interface: fe-0/1/2.200
Routing protocol: PIM Mismatch error: 0
Mismatch: 0 Mismatch no route: 0
Kernel resolve: 22 Routing notify: 0
Resolve no route: 0 Resolve error: 0
Resolve filtered: 0 Notify filtered: 0
In kbytes: 0 In packets: 0
Out kbytes: 0 Out packets: 0