 | Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |
- show route output (address ip-address | interface interface-name)
- <brief | detail | extensive | terse>
- <logical-system (all | logical-system-name)>
Command introduced before JUNOS Release 7.4.
Display the entries in the routing table that are to be sent out the interface with either the specified IP address or name.
address ip-address — Display entries in the routing table that are to be sent out the interface with the specified IP address.
interface interface-name — Display entries in the routing table that are to be sent out the interface with the specified name.
brief | detail | extensive | terse — (Optional) Display the specified level of output. If you do not specify a level of output, the system defaults to brief.
logical-system (all | logical-system-name) — (Optional) Perform this operation on all logical systems or on a particular logical system.
view
For information about output fields, see the show route command (Table 88), the show route detail command ( Table 91), the show route extensive command (Table 97), or the show route terse command (Table 105).
user@host> show route output address 36.1.1.1/24
inet.0: 28 destinations, 30 routes (27 active, 0 holddown, 1 hidden)
+ = Active Route, - = Last Active, * = Both
36.1.1.0/24 *[Direct/0] 00:19:56
> via so-0/1/2.0
[OSPF/10] 00:19:55, metric 1
> via so-0/1/2.0
private1__.inet.0: 2 destinations, 3 routes (2 active, 0 holddown, 0 hidden)
iso.0: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)
mpls.0: 3 destinations, 3 routes (3 active, 0 holddown, 0 hidden)
inet6.0: 2 destinations, 2 routes (2 active, 0 holddown, 0 hidden)
private1__.inet6.0: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)
user@host> show route output address 36.1.1.1
detail
inet.0: 28 destinations, 30 routes (27 active, 0 holddown, 1 hidden)
36.1.1.0/24 (2 entries, 0 announced)
*Direct Preference: 0
Next hop type: Interface
Next-hop reference count: 1
Next hop: via so-0/1/2.0, selected
State: <Active Int>
Age: 23:00
Task: IF
AS path: I
OSPF Preference: 10
Next-hop reference count: 1
Next hop: via so-0/1/2.0, selected
State: <Int>
Inactive reason: Route Preference
Age: 22:59 Metric: 1
Area: 0.0.0.0
Task: OSPF
AS path: I
private1__.inet.0: 2 destinations, 3 routes (2 active, 0 holddown, 0 hidden)
iso.0: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)
mpls.0: 3 destinations, 3 routes (3 active, 0 holddown, 0 hidden)
inet6.0: 2 destinations, 2 routes (2 active, 0 holddown, 0 hidden)
private1__.inet6.0: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)
The output for the show route output address extensive command is identical to that of the show route output address detail command. For sample output, see show route output address detail.
user@host> show route output address 36.1.1.1
terse
inet.0: 28 destinations, 30 routes (27 active, 0 holddown, 1 hidden)
+ = Active Route, - = Last Active, * = Both
A Destination P Prf Metric 1 Metric 2 Next hop AS path
* 36.1.1.0/24 D 0 >so-0/1/2.0
O 10 1 >so-0/1/2.0
private1__.inet.0: 2 destinations, 3 routes (2 active, 0 holddown, 0 hidden)
iso.0: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)
mpls.0: 3 destinations, 3 routes (3 active, 0 holddown, 0 hidden)
inet6.0: 2 destinations, 2 routes (2 active, 0 holddown, 0 hidden)
private1__.inet6.0: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)
user@host> show route output interface so-0/1/2.0
inet.0: 28 destinations, 30 routes (27 active, 0 holddown, 1 hidden)
+ = Active Route, - = Last Active, * = Both
10.255.71.240/32 *[OSPF/10] 00:13:00, metric 2
via so-0/1/2.0
> via so-0/3/2.0
10.255.71.241/32 *[OSPF/10] 00:13:10, metric 1
> via so-0/1/2.0
14.1.1.0/24 *[OSPF/10] 00:05:11, metric 3
to 35.1.1.2 via ge-3/1/0.0
> via so-0/1/2.0
via so-0/3/2.0
16.1.1.0/24 *[OSPF/10] 00:13:10, metric 2
> via so-0/1/2.0
36.1.1.0/24 *[Direct/0] 00:13:21
> via so-0/1/2.0
[OSPF/10] 00:13:20, metric 1
> via so-0/1/2.0
private1__.inet.0: 2 destinations, 3 routes (2 active, 0 holddown, 0 hidden)
iso.0: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)
mpls.0: 3 destinations, 3 routes (3 active, 0 holddown, 0 hidden)
inet6.0: 2 destinations, 2 routes (2 active, 0 holddown, 0 hidden)
private1__.inet6.0: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)
user@host> show route output interface so-0/1/2.0
detail
inet.0: 28 destinations, 30 routes (27 active, 0 holddown, 1 hidden)
10.255.71.240/32 (1 entry, 1 announced)
*OSPF Preference: 10
Next-hop reference count: 2
Next hop: via so-0/1/2.0
Next hop: via so-0/3/2.0, selected
State: <Active Int>
Age: 14:52 Metric: 2
Area: 0.0.0.0
Task: OSPF
Announcement bits (1): 0-KRT
AS path: I
10.255.71.241/32 (1 entry, 1 announced)
*OSPF Preference: 10
Next-hop reference count: 4
Next hop: via so-0/1/2.0, selected
State: <Active Int>
Age: 15:02 Metric: 1
Area: 0.0.0.0
Task: OSPF
Announcement bits (1): 0-KRT
AS path: I
...
The output for the show route output interface extensive command is identical to that of the show route output interface detail command. For sample output, see show route output interface detail.
user@host> show route output interface so-0/1/2.0
terse
inet.0: 28 destinations, 30 routes (27 active, 0 holddown, 1 hidden)
+ = Active Route, - = Last Active, * = Both
A Destination P Prf Metric 1 Metric 2 Next hop AS path
* 10.255.71.240/32 O 10 2 so-0/1/2.0
>so-0/3/2.0
* 10.255.71.241/32 O 10 1 >so-0/1/2.0
* 14.1.1.0/24 O 10 3 35.1.1.2
>so-0/1/2.0
so-0/3/2.0
* 16.1.1.0/24 O 10 2 >so-0/1/2.0
* 36.1.1.0/24 D 0 >so-0/1/2.0
O 10 1 >so-0/1/2.0
private1__.inet.0: 2 destinations, 3 routes (2 active, 0 holddown, 0 hidden)
iso.0: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)
mpls.0: 3 destinations, 3 routes (3 active, 0 holddown, 0 hidden)
inet6.0: 2 destinations, 2 routes (2 active, 0 holddown, 0 hidden)
private1__.inet6.0: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)
| Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |