[Contents] [Prev] [Next] [Index] [Report an Error]

show pim source

Syntax



show pim source
<brief | detail>
<inet | inet6>
<instance instance-name>
<logical-system (all | logical-system-name)>
<source-prefix>

Release Information

Command introduced before JUNOS Release 7.4.

Description

Display information about the Protocol Independent Multicast (PIM) source reverse path forwarding (RPF) state.

Options

none — Display standard information about the PIM RPF state for all supported family addresses for all routing instances on all logical systems.

brief | detail — (Optional) Display the specified level of output.

inet | inet6 — (Optional) Display information for IPv4 or IPv6 family addresses, respectively.

instance instance-name — (Optional) Display information about the RPF state for a specific PIM-enabled routing instance.

logical-system (all | logical-system-name) — (Optional) Perform this operation on all logical systems or on a particular logical system.

source-prefix — (Optional) Display the state for source RPF states in the given range.

Required Privilege Level

view

List of Sample Output

show pim source
show pim source brief
show pim source detail

Output Fields

Table 58 describes the output fields for the show pim source command. Output fields are listed in the approximate order in which they appear.

Table 58: show pim source Output Fields

Field Name	Field Description
Instance	Name of the routing instance.
RPF Address	Address of the source or reverse path.
Prefix/length	Prefix and prefix length for the route used to reach the RPF address.
Upstream interface	RPF interface toward the source address.
Neighbor address	Address of the RPF neighbor used to reach the source address.

show pim source

user@host> show pim source

Instance: PIM.master Family: INET

Source 10.255.14.144
    Prefix 10.255.14.144/32
    Upstream interface Local
    Upstream neighbor Local

Source 10.255.70.15
    Prefix 10.255.70.15/32
    Upstream interface so-1/0/0.0
    Upstream neighbor 10.111.10.2

Instance: PIM.master Family: INET6

show pim source brief

The output for the show pim source brief command is identical to that for the show pim source command. For sample output, see show pim source.

show pim source detail

user@host> show pim source detail

Instance: PIM.master Family: INET

Source 10.255.14.144
    Prefix 10.255.14.144/32
    Upstream interface Local
    Upstream neighbor Local
    Active groups:228.0.0.0
        239.1.1.1
        239.1.1.1

Source 10.255.70.15
    Prefix 10.255.70.15/32
    Upstream interface so-1/0/0.0
    Upstream neighbor 10.111.10.2
    Active groups:239.1.1.1

Instance: PIM.master Family: INET6

[Contents] [Prev] [Next] [Index] [Report an Error]