[Contents] [Prev] [Next] [Index] [Report an Error]

show pim bootstrap

Syntax



show pim bootstrap
<instance instance-name>
<logical-system (all | logical-system-name)>

Release Information

Command introduced before JUNOS Release 7.4.

Description

For sparse mode only, display information about Protocol Independent Multicast (PIM) bootstrap routers.

Options

none — Display PIM bootstrap router information for all routing instances on all logical systems.

instance instance-name — (Optional) Display information about bootstrap routers for a specific PIM-enabled routing instance.

logical-system (all | logical-system-name) — (Optional) Perform this operation on all logical systems or on a particular logical system.

Required Privilege Level

view

List of Sample Output

show pim bootstrap
show pim bootstrap instance

Output Fields

Table 52 describes the output fields for the show pim bootstrap command. Output fields are listed in the approximate order in which they appear.

Table 52: show pim bootstrap Output Fields

Field Name	Field Description
Instance	Name of the routing instance.
BSR	Bootstrap router.
Pri	Priority of the router to be elected to be the bootstrap router.
Local address	Local router’s address.
Pri	Local router’s address priority to be elected as the bootstrap router.
State	Local router's election state: Candidate, Elected, or Ineligible.
Timeout	How long until the local router declares the bootstrap router to be unreachable, in seconds.

show pim bootstrap

user@host> show pim bootstrap

Instance: PIM.master

BSR                    Pri Local address           Pri State      Timeout
None                     0 10.255.71.46              0 InEligible       0
feco:1:1:1:1:0:aff:785c 34 feco:1:1:1:1:0:aff:7c12   0 InEligible       0

show pim bootstrap instance

user@host> show pim bootstrap instance VPN-A

Instance: PIM.VPN-A

BSR             Pri Local address   Pri State      Timeout
None              0 192.168.196.105   0 InEligible       0

[Contents] [Prev] [Next] [Index] [Report an Error]