[Contents] [Prev] [Next] [Index] [Report an Error]

show mpls path

Syntax



show mpls path
<path-name>
<logical-system (all | logical-system-name)>

Release Information

Command introduced before JUNOS Release 7.4.

Description

Display dynamic Multiprotocol Label Switching (MPLS) label-switched paths (LSPs).

Options

none — Display standard information about all MPLS LSPs on all logical systems.

path-name — (Optional) Display information about the specified LSP only.

logical-system (all | logical-system-name) — (Optional) Perform this operation on all logical systems or on a particular logical system.

Required Privilege Level

view

List of Sample Output

show mpls path

Output Fields

Table 149 describes the output fields for the show mpls path command. Output fields are listed in the approximate order in which they appear.

Table 149: show mpls path Output Fields

Field Name	Field Description
Path name	Information about ingress LSPs. Each path has one line of output.
Address	Addresses of the routers that form the LSP.
Strict/loose address	Whether the address is a configured as a strict or loose address.

show mpls path

user@host> show mpls path

Path name        Address          Strict/loose address
p1               123.456.55.6     Strict
                 123.456.1.6      Loose
p2               191.456.1.4      Strict

[Contents] [Prev] [Next] [Index] [Report an Error]