[Contents] [Prev] [Next] [Index] [Report an Error]

show ldp neighbor

Syntax

show ldp neighbor
<neighbor-address>
<brief | detail | extensive>
<instance instance-name>
<logical-system (all | logical-system-name)>

Release Information

Command introduced before JUNOS Release 7.4. The neighbor-address option was introduced in JUNOS 8.5.

Description

Display Label Distribution Protocol (LDP) neighbor information.

Options

neighbor-address — Displays information about the specified LDP neighbor.

none — Display standard information about LDP neighbors for all routing instances on all logical systems.

brief | detail | extensive — (Optional) Display the specified level of output.

instance instance-name — (Optional) Display information for the specified routing instance.

logical-system (all | logical-system-name) — (Optional) Perform this operation on all logical systems or on a particular logical system.

Required Privilege Level

view

Related Topics

clear ldp neighbor

List of Sample Output

show ldp neighbor extensive

Output Fields

Table 130 describes the output fields for the show ldp neighbor command. Output fields are listed in the approximate order in which they appear.

Table 130: show ldp neighbor Output Fields

Field Name

Field Description

Level of Output

Address

IP address of the neighbor.

All levels

Interface

Interface over which the neighbor was discovered.

All levels

Label space ID

Label space identifier advertised by the neighbor.

All levels

Hold time

Remaining hold time before the neighbor expires, in seconds.

All levels

Transport address

Address to which the neighbor wants the local route to establish the LDP session.

detail

Configuration sequence

Counter that increments whenever the neighbor changes its configuration.

detail

Up for

Length of time the LDP neighbor has been in operation.

detail extensive

Reference count

Reference count for the LDP neighbor.

extensive

Hold time

Displays the neighbor's hold time. The hold time is the proposed hold times for the local and peer routers.

extensive

Proposed local/peer

Hold time value proposed by the local router and the peer router.

extensive

show ldp neighbor extensive

user@host> show ldp neighbor extensive 
Address            Interface          Label space ID         Hold Time
 192.168.37.23      so-1/0/0.0         10.255.245.5:0           44
   Transport address: 10.255.245.5, Configuration sequence: 6
   Up for 00:03:37
   Reference count: 1
   Hold time: 45, Proposed local/peer: 15/45
[Contents] [Prev] [Next] [Index] [Report an Error]

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.