[Contents] [Prev] [Next] [Index] [Report an Error]

show ipv6 neighbors

Syntax

show ipv6 neighbors

Release Information

Command introduced before JUNOS Release 7.4.

Description

Display information about the IPv6 neighbor cache.

Options

This command has no options.

Required Privilege Level

view

Related Topics

clear ipv6 neighbors

List of Sample Output

show ipv6 neighbors
show ipv6 neighbors

Output Fields

Table 62 describes the output fields for the show ipv6 neighbors command. Output fields are listed in the approximate order in which they appear.

Table 62: show ipv6 neighbors Output Fields

Field Name

Field Description

IPv6 Address

Name of IPv6 interface.

Linklayer Address

Link-layer address.

State

State of the link: up, down, incomplete, reachable, stale, or unreachable.

Exp

Number of seconds until the entry expires.

Rtr

Whether the neighbor is a router: yes or no.

Secure

Whether this entry was created using the Secure Neighbor Discovery (SEND) protocol: yes or no.

Interface

Name of the interface.

show ipv6 neighbors

user@host> show ipv6 neighbors 
IPv6 Address                 Linklayer Address  State       Exp  Rtr  Interface
fe80::2a0:c9ff:fe5b:4c1e     00:a0:c9:5b:4c:1e  reachable   15   yes  fxp0.0

show ipv6 neighbors

user@host > show ipv6 neighbors 
IPv6 Address                 Linklayer Address  State       Exp Rtr Secure Interface
fe80::14fb:5dcf:54bd:ff76    00:90:69:a0:a8:bc  stale       1113 yes yes    ge-3/2/0.0
[Contents] [Prev] [Next] [Index] [Report an Error]

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.