[Contents] [Prev] [Next] [Index] [Report an Error]

show esis interface

Syntax

show esis interface
<brief | detail | extensive>
<instance instance-name>
<interface interface-name)>

Release Information

Command introduced before JUNOS Release 7.4.

Description

(J-series routing platform only) Display End System-to-Intermediate System (ES-IS) interface information.

Options

none — (Same as brief) Display information for all configured ES-IS interfaces.

brief | detail | extensive — (Optional) Display the specified level of output.

instance instance-name — (Optional) Display configured interfaces for the specified routing instance only.

interface interface-name — (Optional) Display information about the specified interface only.

Required Privilege Level

view

List of Sample Output

show esis interface
show esis interface brief
show esis interface detail
show esis interface extensive

Output Fields

Table 17 describes the output fields for the show esis interface command. Output fields are listed in the approximate order in which they appear.

Table 17: show esis interface Output Fields

Field Name

Field Description

Level of Output

Interface

Interface through which the adjacency is made.

All levels

Receives

Types of hello messages that are received.

All levels

Sends

Types of hello messages that are sent.

All levels

Hello interval

Interface's hello interval, in seconds.

All levels

Adjacencies or Num Adj

Number of adjacencies established on this interface.

All levels

Holdtime

Interface's hold time, in seconds.

detail extensive

State

Internal implementation information.

detail extensive

End system configuration timer

Time, in seconds, for the end system to configure itself for ES-IS.

detail extensive

Interface index

Index value.

detail extensive

NET used in hello

Network entity title used in hello messages.

detail extensive

show esis interface

user@host> show esis interface 
Interface               Receives     Sends  Hello Interval  Num Adj
fe-0/0/0.0                   ISH       ISH           60.00        1
lo0.0                        ISH        -            60.00        0

show esis interface brief

The output for the show esis interface brief command is identical to that for the show esis interface command. For sample output, see show esis interface.

show esis interface detail

user@host> show esis interface detail 
Interface: fe-0/0/0.0
  Receives: ISH, Sends: ISH, Hello interval: 60.00
  Adjacencies: 1, Holdtime: 180, End system configuration timer: 180
  Interface index: 68, State: 0x2
  NET used in hello: 47.0005.80ff.f800.0000.0108.0001.0102.5501.6007 

Interface: lo0.0
  Receives: ISH, Sends:  - , Hello interval: 60.00
  Adjacencies: 0, Holdtime: 180, End system configuration timer: 180
  Interface index: 64, State: 0x2
  NET used in hello: 47.0005.80ff.f800.0000.0108.0001.0102.5501.6007

show esis interface extensive

The output for the show esis interface extensive command is identical to that for the show esis interface detail command. For sample output, see show esis interface detail.

[Contents] [Prev] [Next] [Index] [Report an Error]

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.